Compact Station TKS-CS - Operating Instructions
8000043213 BAL Page 7 of 39
2 Safety The qualified skilled personnel are responsible for safety.
The member of personnel who is responsible for the equipment
must ensure that only suitably qualified persons are allowed
access to the equipment.
To ensure safety in the electrical operating areas, these areas
should be lockable; i.e. suitable locking systems should be
installed by the owner on all exterior doors of the compact station.
2.1 Installation Location
The equipment is intended for use outdoors as an enclosed
electrical unit.
• Environmental conditions: ( technical data) in accordance
with DIN EN 60721-3-4.
• Freely accessible air vents for heat dissipation.
• Ground pressure: min. 250 kN/m2 ( excavation plan)
Refer to the technical data for additional criteria.
When selecting the installation location, regional regulations
governing noise emissions must be taken into account.
Do not install the equipment in areas subject to flooding or those
with a high groundwater level.
2.2 Lightning Protection
The connection to the potential equalisation system of the
foundation provides the equipment with effective protection against
lightning strikes.
The manufacturer’s specifications must be implemented effectively
in order to provide the photovoltaic system with suitable lightning
protection measures.
Further safety information can be found in the Protect PV Inverter Operating
Instructions (BAL).