Insufficient ventilation of equipment | AEG TKS-CS instruction

Compact Station TKS-CS - Operating Instructions

ATTENTION

Insufficient ventilation of equipment

Equipment may overheat.

Keep air vents clear.

Ensure the equipment is sufficiently ventilated.

WARNING

Heat generation in resistors

Risk of burning.

Do not touch hot components.

WARNING

Hinge side of the door when closing

Fingers or hands may be crushed.

Do not hold the hinge side of the door.

Take care while closing the cabinet door.

WARNING

Entry of water into electrical equipment

Risk to life due to electric shock.

Do not use water to clean the cabinets.

Do not place any vessels containing fluids (beverage cups, for example) on electrical equipment.

5 safety rules

1.Disconnect safely.

2.Secure the equipment against being switched back on.

3.Verify that all poles are de-energised.

4.Earth the equipment, close the earthing switch and short- circuit the equipment.

5.Provide protection in the form of covers or barriers for any neighbouring live parts.

iA safe disconnection certificate or a release certificate according to DIN VDE 0105-100 (EN 50110) must be presented prior to all maintenance and repair work.

	i	The owner must draw up a safe disconnection procedure and
		The owner must draw up a safe disconnection procedure and
		brief personnel on this.


Page 26 of 39		8000043213 BAL

Image 26

AEG TKS-CS Insufficient ventilation of equipment, Heat generation in resistors, Entry of water into electrical equipment

Contents

TKS-CS Revision Service Status Revision Date Name Table of Contents Decommissioning and Dismantling Mailservice.aegpss@aegps.com Appropriate Use General InformationValidity List of Abbreviations Lightning Protection SafetyInstallation Location Scope of Delivery Available to order Equipment Specifications Structure Low-Voltage Box DimensionsDimension AC Connections Low-voltage boxes example ISO Small Distribution Box Communications Cabinet PV LoG-MH Central Earthing System Medium-Voltage System No. H07V-KName Transformer 3 4 5 4 Functional Description Transfer station Transport Suspended loads during transport Assembly Setting in Place Connection Design Torque InstallationHinge side of the door when closing Communication Interface PV.LoG-MH Medium-voltage system example Medium-Voltage Transformer Tightening Torques for Screw Connections Working with voltages up to 1 kV Start-upOperation Residual voltage from capacitors ServicingContact with voltage Contact with leakage current Entry of water into electrical equipment Insufficient ventilation of equipmentHeat generation in resistors Obligation to Keep a Written Record Maintenance and Inspection Visual Inspection Cleaning Testing/Measuring Functional Test Rotating parts Care LubricationReplacing the Axial Ventilator Repairs Testing after RepairsReplacement Work Replacing the Transformer Roof structure Station frame Station roof Replacing the MV Switchgear Partial top view TKS-CS example Monthly Maintenance ScheduleOngoing Every 6 months Every 2 years Storing Spare PartsAnnually Every 4 years Dismantling Decommissioning and DismantlingRemoving Connection Cables Disposal Statutory Provisions Chemical System Components Compact Station TKS-CS Operating Instructions List of Tables List of Figures