AEG TKS-CS Testing after Repairs, Replacement Work Replacing the Transformer

Compact Station TKS-CS - Operating Instructions

10.3Repairs

Only AEG PS skilled personnel may carry out repairs and modifications on the compact station CS.xx.

If you want other personnel to carry out this work, this will need to be authorised by means of written approval from AEG PS.

Only original AEG PS spare parts (or spare parts purchased from AEG PS) may be used.

10.3.1Testing after Repairs

Each time the equipment is repaired or modified, all recurrent tests/measurements are to be carried out and documented in accordance with DIN VDE 0105 (initial start-up log) once the work is complete.

10.3.2Replacement Work

10.3.2.1 Replacing the Transformer

The transformer can be accessed via the detachable roof or a door. It can only be replaced when the roof structure has been removed.

1 2 3 2

Figure 18 - Replacing the transformer, 1 (example)

1	Temperature sensor	3 Internal connections from
2	Internal connections to	low-voltage box
	MV system

1.Disconnect the equipment safely.

2.Remove all connections from the transformer, and secure the equipment.

8000043213 BAL Page 31 of 39