AEG operating instructions Replacing the MV Switchgear, Partial top view TKS-CS example

Compact Station TKS-CS - Operating Instructions

5.Place a new transformer in the compact station's trough and establish the connections. Finally, replace and align the roof structure, and establish the screw connections ( transformer operating instructions).

10.3.2.2Replacing the MV Switchgear

12

	3	4
Figure 21 - Partial top view TKS-CS (example)
1	Transformer compartment	3	Medium-voltage compartment
2	Low-voltage box	4	MV switchgear

1.Disconnect the equipment safely.

2.Remove all connections from the MV switchgear, and secure the equipment.

3.Unscrew the screws of the MV switchgear and remove it from the compact station using an industrial truck ( MV switchgear BAL).

8000043213 BAL Page 33 of 39