Transport, Suspended loads during transport | AEG TKS-CS specification

Compact Station TKS-CS - Operating Instructions

6.Transport

DANGER

Suspended loads during transport

Possibility of death or crushing.

Select lifting gear according to the total weight to be transported.

Do not step under suspended loads.

Secure the danger zone.

Wear personal protective equipment.

Figure 11 - Crane transport

The station may only be lifted using the crane rings on the longitudinal sides. The crane rings on the face sides are only intended for transport securing purposes and for dragging/towing the stations while they are raised. Raising the stations using the crane rings on the face sides is not permitted.

The load-carrying equipment used (ropes/belts) must have a sufficient carrying capacity. The weight of the station is dependent on the equipment configuration; please see the technical data.

The load must be evenly distributed between all four ropes/belts. Lifting at one side is not permitted.

No people or objects may be on the platforms in front of the station doors during lifting.

8000043213 BAL

Page 17 of 39

Image 17

AEG TKS-CS operating instructions Transport, Suspended loads during transport

Contents

TKS-CS Status Revision Date Name Revision Service Table of Contents Decommissioning and Dismantling Mailservice.aegpss@aegps.com Validity General InformationAppropriate Use List of Abbreviations Lightning Protection SafetyInstallation Location Available to order Scope of Delivery Structure Equipment Specifications Low-Voltage Box DimensionsDimension Low-voltage boxes example AC Connections ISO Small Distribution Box Central Earthing System Communications Cabinet PV LoG-MH No. H07V-KName Medium-Voltage System 3 4 5 4 Transformer Transfer station Functional Description Suspended loads during transport Transport Setting in Place Assembly Connection Design Torque InstallationHinge side of the door when closing Communication Interface PV.LoG-MH Medium-voltage system example Medium-Voltage Transformer Tightening Torques for Screw Connections Working with voltages up to 1 kV Start-upOperation Contact with voltage ServicingResidual voltage from capacitors Contact with leakage current Entry of water into electrical equipment Insufficient ventilation of equipmentHeat generation in resistors Obligation to Keep a Written Record Cleaning Maintenance and Inspection Visual Inspection Functional Test Testing/Measuring Rotating parts Care LubricationReplacing the Axial Ventilator Repairs Testing after RepairsReplacement Work Replacing the Transformer Station roof Roof structure Station frame Partial top view TKS-CS example Replacing the MV Switchgear Ongoing Maintenance ScheduleMonthly Every 6 months Annually Storing Spare PartsEvery 2 years Every 4 years Dismantling Decommissioning and DismantlingRemoving Connection Cables Chemical System Components Disposal Statutory Provisions Compact Station TKS-CS Operating Instructions List of Figures List of Tables