ERROR MESSAGES
If the start/stop switch or the reverse stitch switch is pushed, when the sewing machine is not set up correctly, or if an incorrect operation is made, the sewing machine will not operate, and a buzzer will sound and an error message will be displayed.
When an error message is displayed, fix the problem following the instructions in the message.
The error message will disappear once the problem has been fixed.
Check that USB cable is connected and power switch is turned on.
Turn off power switch and attach large hoop.
Bobbin winder is in operation.
Buttonhole lever is lowered. Raise buttonhole lever.
Lower presser foot by lowering presser foot lifter.
Raise needle by rotating hand wheel toward you.
*This sewing machine is equipped with a safety device which senses if the thread gets tangled up with the hook during sewing, and automatically interrupts the flow of current within 3 seconds to stop the motor from operating when such a problem occurs.
*If this safety device has operated, turn off the power for the sewing machine and eliminate the cause of the problem that caused the sewing machine to stop.
*Then, turn the hand wheel toward you to check that the sewing machine works normally again, and then
Check bobbin winder and move it to left.
Thread breakage is detected. Check threads.
SAFTY DEVICE
ACTIVATED
90
