![](/images/new-backgrounds/1010773/10773163x1.webp)
REMOVING EMBROIDERY UNIT
Always be sure to turn off power to machine before CAUTION installing embroidery unit.
*Turn off power to machine.
*Remove embroidery hoop from machine. (Refer to page 72 - 73.)
1.Holding handle of embroidery unit, carefully slide toward the left while pressing release lever.
Note:
Do not pull carriage when removing embroidery unit.
2.Insert the tab at the bottom of connector cap first, and push in the top of the connector cap with your finger as illustrated.
1
Release lever
Support de cerceau
Palanca de liberación
2
Handle
Poignée
Mango
Connector cap
Couvercle de connecteur
Tapa de conector
Tab
Languette
Lengüeta
80