![](/images/new-backgrounds/1010773/10773159x1.webp)
ATTACHING AND REMOVING EMBROIDERY HOOP
1.Raise presser foot and needle, and push up lever (A) of embroidery foot with your finger and pass embroidery hoop under it.
¿To remove, pull the hoop forward to slide it out from underneath the embroidery foot.
2.Attach hoop to embroidery unit by aligning hoop mounting screws (D) and the grooves in hoop mounting plate, fitting projections (C) on hoop bracket into square holes (B) in hoop mounting plate. Securely tighten hoop mounting screws (D) with screwdriver.
¿To remove, loosen hoop mounting screws (D) and remove the hoop from the hoop bracket.
NOTE: Before attaching small hoop, turn on power switch to move the carriage to embroidering standby position, and turn off power switch.
1 ( A )
2 | (C) | (D) | Carriage |
Chariot |
(D) | Carro |
|
(B)(B)
Hoop mounting plate
Plaque de montage de cerceau
Placa de montaje de aro
78