PREPARATION FOR EMBROIDERY SEWING
SECURING MATERIAL IN EMBROIDERY HOOP
1.Loosen hoop adjusting screw on outer frame and remove inner frame. Place material between inner and outer frame.
2.Slightly tighten the hoop adjusting screw and pull material edges to remove slack.
Fit the two frames together by pressing down on the inner frame.
a. Tighten hoop adjusting screw.
b. Press down on the inner frame to stretch the material
into the outer frame, and then
c.Tighten the material in the frames so that it makes a sound like a drum when the tightened surface is tapped with a finger.
Once material is properly positioned in embroidery frame with no slack, securely tighten the screw.
1
2
Hoop adjusting screw
Vis de réglage de cerceau
Tornillo de ajuste de aro
70
