OPERATION SWITCHES
NEEDLE UP/DOWN SWITCH
When the needle up/down switch is pushed, the needle moves and stops at its lowest position. If the switch is pushed once more, the needle moves and stops at its highest position. Use for sewing curves, corners and topstitching.
REVERSE STITCH SWITCH
Reverse sewing is carried out while the reverse stitch switch is pushed (only for normal sewing).
NOTE: If the power cord is disconnected from the wall outlet during sewing, or if the sewing machine stops due to a power outage, the sewing machine will not operate immediately even when the power is restored. To start the sewing machine again, turn the power switch to OFF and then back to ON again, and then start the machine.
START/STOP SWITCH
This switch works only when sewing embroidery.
LED INDICATOR
¿Green light indicates machine is ready to start.
¿Red light indicates machine is operating.
¿Flashing red light indicates a problem or an error.
*Flashing for 2 - 3 seconds shows that an incorrect operation was made.
*Continuous flashing indicates that machine malfunctions.
Needle up/down switch
Positionnement haut/bas de l’aiguille
Interruptor agja arriba/abajo
Reverse stitch switch Interrupteur couture arrière
Interruptor de puntadas hacia atrás
LED indicator
Témoin a diode
Indicador LED
Start/stop switch (For embroidery only)
Interrupteur marche/arrêt (Pour la broderie seulement)
Pulsador de comienzo/parada (Sólo para bordado)
12
