Polycom 1500/1800/2000/4000 manual Default Management Network Service Routers Field Description

IP Network Services

5Modify the following fields:

Default Management Network Service – Routers

Field	Description
Default Router IP	IPv4	Enter the IP address of the default router. The default router
Address		is used whenever the defined static routers are not able to
	IPv6
		route packets to their destination. The default router is also
		used when host access is restricted to one default router.
Static Routes		The system uses Static Routes to search other networks
(IPv4 Only Table)		for endpoint addresses that are not found on the local LAN.
		Up to five routers can be defined in addition to the Default
		Router. The order in which the routers appear in the list
		determines the order in which the system looks for the
		endpoints on the various networks. If the address is in the
		local subnet, no router is used.
		To define a static route (starting with the first), click the
		appropriate column and enter the required value.
	Router IP	Enter the IP address of the router.
	Address
	Remote IP	Enter the IP address of the entity to be reached outside the
	Address	local network. The Remote Type determines whether this
		entity is a specific component (Host) or a network.
		• If Host is selected in the Remote Type field, enter the IP
		address of the endpoint.
		• If Network is selected in the Remote Type field, enter of
		the segment of the other network.
	Remote Subnet	Enter the subnet mask of the remote network.
	Mask
	Remote Type	Select the type of router connection:
		• Network – defines a connection to a router segment in
		another network.
		• Host – defines a direct connection to an endpoint found
		on another network.

Polycom, Inc. 482