Polycom 1500/1800/2000/4000 Ignoreaim, Iplinkenvironment, Ipresponseecho, IPV6AUTOADDRESSCONFIGU

	System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
IGNORE_AIM	Audio Indicate Muted (AIM) is Relevant to H.323 endpoints. When an
	endpoint mutes its microphone, it does not necessarily mute its entire audio
	stream. This allows sharing of Content that includes audio while
	microphones are muted.
	When set to:
	NO - When the AIM signal is received, the participant is muted and a mute
	icon is displayed in the RMX Web Client / RMX Manager.
	YES - When the AIM signal is received, the participant is not muted and a
	mute icon is not displayed in the RMX Web Client / RMX Manager.
	Range: YES, NO
	Default: NO
IP_LINK_ENVIRONMENT	In H.239-enabled MIH Cascading, when MGC is on level 1, setting this flag
	to YES will adjust the line rate of HD Video Switching conferences run on
	the RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 from
	1920Kbps to 18432, 100bits/sec to match the actual rate of the IP Only HD
	Video Switching conference running on the MGC.
	Note: If the flag MIX_LINK_ENVIRONMENT is set to NO, the
	IP_ENVIRONMENT_LINK flag must be set to YES.
IP_RESPONSE_ECHO	When the System Flag value is YES, the Collaboration Server will respond
	to ping (IPv4) and ping6 (IPv6) commands. When set to NO, the
	Collaboration Server will not respond to ping and ping6 commands.
IPV6_AUTO_ADDRESS_CONFIGU	SLAAC (Stateless Address Auto Configuration) and DHCPv6 related
RATION_METHOD	system behavior is controlled by setting this flag’s value as required.
	Range: AUTO / SLAAC
	AUTO—(default) Use DHCPv6 first in case of failure use SLAAC.
	SLAAC—Use SLAAC only.
ITP_CERTIFICATION	When set to NO (default), this flag disables the telepresence features in the
	Conference Profile.
	Set the flag to YES to enable the telepresence features in the Conference
	Profile (provided that the appropriate License is installed).
LAN_REDUNDANCY	Enables Local Area Network port redundancy on RealPresence
	Collaboration Server (RMX) 2000/4000 RTM LAN Card and RealPresence
	Collaboration Server (RMX) 1500 LAN ports on the RTM IP 1500.

Range: YES / NO

Default: NO

Note: If the flag value is set to YES and either of the LAN connections (LAN1 or LAN2) experiences a problem, an active alarm is raised stating that there is no LAN connection, specifying both the card and port number.

Polycom®, Inc. 789