Polycom 1500/1800/2000/4000 manual Ultra Secure Mode Flag, Numericchairpass Default LEN

System Configuration Flags

Automatic Password Generation Flags

Flag	Description
NUMERIC_CHAIR_PASS_ DEFAULT _LEN	This flag enables or disables the automatic generation of
	chairperson passwords. The length of the automatically
	generated passwords is determined by the flag value.
	Possible values:
	• 0 – 16, 6 default (non-secured mode)
	• 0 and 9 – 16, 9 default (Ultra Secure Mode).
	Enter 0 to disable the automatic generation of passwords.
	Any value other than 0 enables the automatic generation of
	chairperson passwords provided the flag
	HIDE_CONFERENCE_PASSWORD is set to NO.
	If the default is used, in non-secured mode the system will
	automatically generate chairperson passwords that contain 6
	characters.

The default password length defined by the NUMERIC_CONF_PASS_DEFAULT_LEN or

NUMERIC_CHAIR_PASS_ DEFAULT LEN does not fall within the range defined by the minimum and maximum length an appropriate fault is added to the Faults list.

Flags Specific to Maximum Security Environments - Ultra Secure Mode

The Collaboration Server can operate in one of two modes: Standard Security Mode or Ultra Secure Mode. In Ultra Secure Mode the enhanced security features of the version are rigorously enforced.

The Ultra Secure Mode is enabled or disabled depending on the value of the ULTRA_SECURE_MODE System Flag.

Ultra Secure Mode, is enabled by manually adding the ULTRA_SECURE_MODE flag to the System Configuration and setting its value to YES.

Ultra Secure Mode Flag

WARNING: Once Ultra Secure Mode is enabled it can only be undone by performing a Restore to Factory Defaults. Also, to implement a Maximum Security environment, other Polycom products on the network must be similarly configured.

For more information see Restoring Defaults.

Polycom®, Inc. 811