Polycom 1500/1800/2000/4000 manual To automatically select a defined participant

Additional Conferencing Information

To select the lecturer and enable the Lecture Mode while starting the conference:

»In the Conference Properties - Participant dialog box, enable the Lecture Mode using one of the following methods:

To automatically select a defined participant:

1Add participants to the conference either from the Address book or by defining new participants.

2In the Lecturer field, select the lecturer from the list of the defined participants.

To automatically select the lecturer:

»In the Lecturer field, select [Auto].

In this mode, the conference speaker becomes the lecturer.

To select the lecturer and enable the Lecture Mode during the ongoing conference:

1Make sure that the participant you want to designate as the lecturer has connected to the conference.

Polycom®, Inc. 206