Polycom 1500/1800/2000/4000 manual Conference Properties General, Svc

	Conference and Participant Monitoring
Conference Properties - General
Field	Description
Conferencing Mode	The conferencing mode set for the conference: CP, VSW, SVC Only, or CP
	and SVC.
Start Time	The time the conference started.
End Time	The expected conference end time.
	Note: This field is not shown when the conference is set as a Permanent
	Conference.
Conference Password	A numeric password for participants to access the conference.
Chairperson Password	A numeric password used by participants to identify themselves as the
	conference chairperson.
ID	The conference ID.
Profile	The name of the conference Profile from which conference parameters were
	taken.
Line Rate	The maximum transfer rate, in kilobytes per second (Kbps) of the call (video
	and audio streams).
Video Switching	When selected, the conference is running in a special conferencing mode
	which implies that all participants must connect at the same line rate and the
	video parameters are set according to the highest common parameters.
	Participants with endpoints not supporting the video parameters (such as the
	video protocol, resolution and frame rate) selected for the conference will
	connect as secondary (audio only). If HD 1080p is selected for the conference,
	endpoints that do not support HD 1080p resolution are connected as
	Secondary (Audio Only) participants.
	Video layout changes are not enabled during a conference.
	Note: Video Switching conferencing mode is unavailable to ISDN participants.
	For more information, see Video Switching (VSW) Conferencing.
Reserve Resources for	Displays the number of video participants for which the system reserved
Video Participants	resources.
	Default: 0 participants.
Reserve Resources for	Displays the number of audio participants for which the system reserved
Audio Participants	resources.
	Default: 0 participants.
Max Number of	Indicates the total number of participants that can be connected to the
Participants	conference. The Automatic setting indicates the maximum number of
	participants that can be connected to the MCU according to resource
	availability.
Enable ISDN/PSTN	When selected, ISDN/PSTN participants can dial into the conference.
Network Service
ISDN/PSTN Network	When the Enable ISDN/PSTN Network Service is selected, displays the default
Service	Network Service.

Polycom®, Inc. 409