Polycom 1500/1800/2000/4000 manual Video Resource Usage, Resource-Quality Balanced default

Video Protocols and Resolution Configuration for CP Conferencing

The following factors affect the decision matrices:

●The Media card(s) installed in the system affect the number of video resources used for each video resolution and frame rate, the supported video protocols and the maximum resolution that can be used by the Collaboration Server.

●The used video protocol: H.264 base Profile or H.264 High Profile. The H.264 High Profile maintains the Video quality at bit rates that are up to 50% lower than previously required. For example, a 512 kbps call will have the video quality of a 1Mbps HD call while a 1Mbps HD call has higher video quality at the same (1Mbps) bit rate.

●A different decision matrix is used for Motion and Sharpness as the quality requirements are different.

The system is shipped with three pre-defined settings of the decision matrix for H.264 Base Profile and three pre-defined settings of the decision matrix for H.264 High Profile with Motion and Sharpness video quality for each of the following resource management schemes:

●Resource-Quality Balanced (default)

A balance between video quality and resource usage. This is the only available resolution configuration in version 6.0.x and earlier.

●Resource Optimized

System resource usage is optimized by allowing high resolution connections only at high line rates and may result in lower video resolutions (in comparison to other resolution configurations) for some line rates. This option allows to save MCU resources and increase the number of participant connections.

●Video Quality Optimized

Video is optimized through higher resolution connections at lower line rates increasing the resource usage at lower line rates. This may decrease the number of participant connections.

Video Resource Usage

Video resource usage is dependent on the participant’s line rate, resolution and Video Quality settings.

Polycom®, Inc. 114