Polycom 1500/1800/2000/4000 manual Forcesystembroadcastv, Olume, Forcesystemlisteningvo, Lume

System Configuration Flags

MCMS_PARAMETERS_USER Flags

Flag	Description
FORCE_SYSTEM_BROADCAST_V	If set to YES, the level of broadcasting volume of the connected participant
OLUME	is value taken from the system flag SYSTEM_BROADCAST_VOLUME.
	If set to NO (default), the broadcasting volume level is 5.
FORCE_SYSTEM_LISTENING_VO	If set to YES, the level of listening volume of the connected participant is
LUME	value taken from the system flag SYSTEM_LISTENING_VOLUME.
	If set to NO (default), the listening volume level is 5.
GK_MANDATORY_FOR_CALLS_IN	If set to YES, a gatekeeper is required to receive incoming H.323 calls. If a
	gatekeeper is not configure in the Collaboration Server, the calls will fail.
	If set to NO (default), gatekeeper is not required to process H.323 incoming
	calls and H.323 participants can dial in with or without a gatekeeper.
GK_MANDATORY_FOR_CALLS_O	If set to YES, a gatekeeper is required to perform H.323 outgoing calls. If a
UT	gatekeeper is not configure on the Collaboration Server, the calls will fail.
	If set to NO (default), gatekeeper is not required to dial out to H.323
	participants and calls can be dialed out with or without a gatekeeper.
H263_ANNEX_T	Set to NO to send the content stream without Annex T and enable Aethra
	and Tandberg endpoints, that do not support Annex T, to process the
	content.
	Default: YES
HD_THRESHOLD_BITRATE	Sets the minimum bit rate required by endpoints to connect to an HD
	Conference. Endpoints that cannot support this bit rate are connected as
	audio only.
	Range: 384kbps - 4Mbs (Default: 768)
HW_FOLLOW_SPEAKER_RESOL	Enables endpoints capable of higher resolution In a conference where
UTION_ON_1X1_LAYOUT	some endpoints are lower than 4CIF and others are higher to receive the
	Indication icons.
INTERNAL_SCHEDULER	When set to NO (default) this flag prevents potential scheduling conflicts
	from occurring as a result of system calls from external scheduling
	applications such as Polycom ReadiManager®, and others via the API.
	Set to YES to schedule conference reservations using an external
	scheduling application.
ISDN_COUNTRY_ CODE	The name of the country in which the MCU is located.
	Default: COUNTRY_NIL
ISDN_IDLE_CODE_E1	The Idle code (silent), transmitted on the ISDN E1 B channels, when there
	is no transmission on the channels.
	Default: 0x54
ISDN_IDLE_CODE_T1	The Idle code (silent), transmitted on the ISDN T1 B channels, when there
	is no transmission on the channels.
	Default: 0x13
ISDN_NUM_OF DIGITS	When using ISDN Overlap sending dialing mode, this field holds the
	number of digits to be received by the MCU.
	Default: 9
Polycom®, Inc.	766