Polycom 1500/1800/2000/4000 manual SIP Only, IP only

	Address Book
New Participant - General
Field	Description
SIP Address/Type	Select the format in which the SIP address is written:
(SIP Only)	• SIP URI - Uses the format of an E-mail address, typically containing a user name
	and a host name: sip:[user]@[host]. For example, sip:dan@polycom.com.
	Note: If the SIP Address field contains an IPv6 address, it must be surrounded by
	square brackets, for example, [::1].
	• TEL URI - Used when the endpoint does not specify the domain that should
	interpret a telephone number that has been input by the user. Rather, each domain
	through which the request passes would be given that opportunity.
	For example, a user in an airport might log in and send requests through an outbound
	proxy in the airport. If the users enters 411 (this is the phone number for local
	directory assistance in the United States), this number needs to be interpreted and
	processed by the outbound proxy in the airport, and not by the user's home domain.
	In this case, tel: 411 is the correct choice.
	Note: This field is removed from the dialog box when the ISDN/PSTN protocol is
	selected.
Endpoint Website	Enter the IP address of the endpoint’s internal site to enable connection to it for
IP Address	management and configuration purposes.
(IP only)	This field is automatically completed the first time that the endpoint connects to the
	Collaboration Server. If the field is blank it can be manually completed by the system
	administrator. The field can be modified while the endpoint is connected
Audio Only	Select this check box to define the participant as a voice participant, with no video
	capabilities.
Extension/Identifier	Dial-out participants that connect to an external device such as Cascaded Links or
String	Recording Links may be required to enter a conference password or an identifying
	string to connect. Enter the required string as follows:
	[p]…[p][string]
	For example: pp4566#
	p (optional) - Indicates a pause of one second before sending the DTMF string. Enter
	several concatenated [p]s to increase the delay before sending the string. The
	required delay depends on the configuration of the external device or conference IVR
	system.
	String - Enter the required string using the digits 0-9 and the characters * and #. The
	maximum number of characters that can be entered is identical to the H.323 alias
	length.
	If the information required to access the device/conference is composed of several
	strings, for example, the conference ID and the conference password, this information
	can be entered as one string, where pauses [p] are added between the strings for the
	required delays, as follows:
	[p]…[p][string][p]…[p] [string]...
	For example: p23pp*34p4566#
Extension/Identifier	The Collaboration Server automatically sends this information upon connection to the
String	destination device/conference. The information is sent by the Collaboration Server as
	DTMF code to the destination device/conference, simulating the standard IVR
	procedure.

Polycom®, Inc. 300