Polycom 1500/1800/2000/4000 manual SNMPv3 Traps Field Description, Snmp, Sha

Administration and Utilities

10 Define the following parameters:

SNMPv3 - Traps

Field	Description
SNMP Trap Version	Specifies the version, either Version 1 2 or 3 of the traps being sent to the IP
	Host. Polycom software supports the standard SNMP version 1 and 2 traps,
	which are taken from RFC 1215, convention for defining traps for use with
	SNMP.
	Note: The SNMP Trap Version parameters must be defined identically in the
	external SNMP application.
Trap Destination	This box lists the currently defined IP addresses of the Manager terminals to
	which the message (trap) is sent.
	IP	Enter the IP address of the SNMP trap	All Versions
		recipient.
	Community Name	Enter the Community Name of the	Version 1
		manager terminal used to monitor the	and Version
		MCU activity	2
	User Name	Enter the name of the user who is to have	Version 3
		access to the trap.
	Authentication	Enter the authentication protocol: MD5 or
	Protocol	SHA.
	Privacy Protocol	Enter the privacy protocol: DES or AES.
	Engine ID	Enter an Engine ID to be used for both
		the Agent and the Trap.

Default: Empty

Polycom®, Inc. 726