Polycom 1500/1800/2000/4000 manual New AVC CP Profile General Parameters, Field/Option Description

	Defining AVC-Based Conference Profiles
New AVC CP Profile - General Parameters
Field/Option	Description
Line Rate	Select the conference bit rate. The line rate represents the combined video, audio
	and Content rate.
	The default setting is 384 Kbps.
	Notes:
	• This field is displayed in all tabs.
	• The maximum line rate at which ISDN endpoints can connect to a conference is
	768 kbps.
	Downspeeding is not supported. As a result, ISDN calls will consume
	bandwidth resources according to the Line Rate specified in the conference
	Profile. For example, if the conference Line Rate is 512kbps, ISDN calls
	connecting at lower line rates (256kbps) will still consume the bandwidth
	resources of 512kbps calls. As a result, if bandwidth resources are fully
	consumed, ISDN calls may be rejected before media card resources are
	exhausted.
	• The Collaboration Server supports AVC-CP conferences at line rates of up to
	6Mbps:
	 For Dial-in calls only.
	 For use with HD1080p30/60 and HD720p60 resolutions.
	To prevent excessive bandwidth usage and resource consumption, the system
	will ignore a Line Rate of 6Mbps, substituting line rates appropriate to the
	Maximum Resolution defined.
	 For MPMRx and RMX1800:
	Up to 1Mbps for SD30, CIF60 and below
	Up to 4Mbps for SD60, HD720p30
	Up to 6Mbps for HD720p60, HD1080p30, HD1080p60
	 For MPMx:
	Up to 2Mbps for SD30, CIF60 and below
	Up to 4Mbps for SD60, HD720p30 and above
	(RMX1800-0 maximum AVC-CP conferencing line rate: 4Mbps.)
	• If ‘Maximum Resolution’ is specified in ‘Video Quality Parameters’, the line rate
	might be modified automatically according to table ‘Maximum negotiated line
	rate for resolutions’.
	• If ‘Maximum Resolution’ is specified in ‘Video Quality Parameters’, the line rate
	might be modified automatically according to the Maximum Negotiated Line Rate
	for Resolutions table.
Conferencing Mode	Select the required Conferencing Mode. The selection affects the available tabs

and their fields.

Notes:

• This field is displayed in all tabs.

• If the selected Line Rate is higher than 4Mbps, and Conferencing Mode is

modified to SVC Only or CP and SVC, the line rate is dropped to match SVC-enabled conferencing rates.

Polycom®, Inc. 42