Polycom 1500/1800/2000/4000 manual Default Profile Settings in CP Conferencing Mode, Mcu

Using Conference Profiles

Conferencing Capabilities in the Different Conferencing Modes

Feature	CP Only	Mixed CP & SVC	SVC Only	VSW
Recording				
		AVC recording only
Site Names			Managed by the	
		AVC endpoints only	endpoint (not via
			MCU)
Message Overlay				
		AVC endpoints only

*Entry Queue & Destination Conference must have the same profile (i.e. SVC only to SVC only, Mixed CP and SVC to Mixed CP and SVC)

***For AVC, the LPR error resiliency is used, however for SVC endpoints, new error resiliency methods are used.

‡ Cascading is not supported on Collaboration Server (RMX) 1800-0.

Default Profile Settings in CP Conferencing Mode

The Collaboration Server is shipped with a default Conference Profile for CP conferences which allows users to immediately start standard ongoing CP conferences. These are also the default settings when creating a new Profile. The default settings are as follows:

Default CP Only Conference Profile Settings

Setting	Value
Profile Name	Factory_Video_Profile
Line Rate	384Kbps
Video Switching	Disabled
Operator Conference	Disabled
Encryption	Disabled
Packet Loss Compensation (LPR	Enabled for CP Conferences
and DBA)
Auto Terminate	• After last participant quits - Enabled
	• When last participant remains - Disabled
Auto Redialing	Disabled
Exclusive Content Mode	Disabled
TIP Compatibility	Disabled
Enable FECC	Enabled
Enabled Gathering Phase	Enabled

Polycom®, Inc. 27