Polycom, Inc 534 | Polycom 1500/1800/2000/4000 manual

Network Security

The following figure shows the network topology with two different media and signaling networks and one Management network connected to the Collaboration Server (RMX) 1800.

RealPresence Collaboration Server (RMX) 1800 - Multiple Networks Topology Sample

Guidelines

●Multiple Services system mode is a purchasable option and it is enabled in the MCU license.

●Multiple Network Services are supported in MCUs with at least 1024MB memory only. MCU units with memory of 512MB support only one IP Network Service.

●Multiple Services system mode is enabled when the system configuration flag MULTIPLE_SERVICES is added and set to YES.

●Only IPv4 is supported for the definition of Multiple Network Services.

The MULTIPLE_SERVICE System Flag cannot be set to YES when IPv6 Addressing is enabled.

●When configuring Multiple Networks on the RealPresence Collaboration Server (RMX) 2000, the RMX2000_RTM_LAN flag must be set to YES in addition to the MULTIPLE_NETWORKS=YES flag.

●Multiple Network Services are not supported with Microsoft ICE Environments in versions prior to Version 7.8.

●Up to two Network Services, one per LAN port, can be associated with each Media card.

●An IP Network Service can be associated with one or several media cards. If more than one card is associated with the same Network Service, the system routes the calls to the appropriate card according to resource availability.

Polycom®, Inc.

534

Image 565

Polycom 1500/1800/2000/4000 manual Polycom, Inc 534

Contents

Version 8.5 January 2015 3725-74300-000B RealPresence Collaboration Server RMXPage Contents Defining AVC-Based Conference Profiles Defining SVC and Mixed CP and SVC Conference Profiles Sharing Content During Conferences108 131 Customized Content Rate 135132 135 Implementing Media Encryption for Secured Conferencing Setting Conferences for Telepresence Mode AVC CP Additional Conferencing Information Defining Cascading Conferences Entry Queues, Ad Hoc Conferences and SIP Factories Meeting Rooms239 Address Book Operator Assistance & Participant Move Scheduling Reservations Conference Templates Using Audible Alarms 349Start a Conference 349 Polycom Conferencing for Microsoft Outlook Conference and Participant Level OperationsConference and Participant Monitoring Users, Connections, and Notes Recording and Streaming Conferences IP Network Services Modifying an ISDN/PSTN Network Service 530 Defining ISDN/PSTN Network Services 522Network Security 532 IVR Services 566 Gateway Calls Call Detail Record CDR Utility Use the RMX Web Client 677 RMX Manager Application 651Starting the RMX Web Client Administration and Utilities 714 Customizing the Multilingual Setting 734716 717 System Configuration Flags 762 Ultra Secure Mode 812 Polycom, Inc Xxiii Collaboration Server Hardware Monitoring Appendix a Disconnection Causes 891 Appendix H Deployment Into Microsoft Environments Restoring Defaults Appendix I Polycom Open Collaboration Network Pocn 1023 Multipoint Calls using DMA 10391035 1036 Appendix K SIP RFC Support Appendix L Media Traffic Shaping Appendix J Restore DefaultsAppendix M Homologation for Brazil Overview Who Should Read This Guide? Administration menuHow This Guide is Organized Prerequisites About the RealPresence Collaboration Server System IP Networks Network Services Guidelines Viewing the Card Configuration Mode Card Configuration ModesIsdn Networks Differences Between MPMx and MPMRx Media Cards Features Supported with MPMRx Cards General RealPresence Collaboration Server Supported Features Support for Microsoft Protocols, algorithms and workflows Software Prerequisites and Guidelines 1500/1800/2000/4000 Getting Started Guide AVC Conferencing Conferencing Modes OverviewContinuous Presence CP Conferencing AVC Continuous Presence CP video streams and built layouts Video Protocol Support in CP Conferences Video Switching VSW Conferencing AVC Video Switching VSW video streams and Full Screen Layout Video Switching VSW Conferencing Guidelines Up to 2Mbps 160 130 320 260 4Mbps 6Mbps 100 200 AVC Basic Conferencing Parameters Video resolution Supplemental Conferencing Features SVC video streams and Layouts SVC-based Conferencing Advantages of SVC Conferencing SVC Conferencing Guidelines  Fecc MCU Supported Resolutions for SVC Conferencing Mixed CP and SVC Conferencing MCU Resource Capacities for Mixed CP and SVC Conferences Conferencing Modes Overview Conferencing Parameters Defined in a Profile Using Conference Profiles Conferencing Capabilities in the Various Conferencing Modes Conferencing FeatureConference Type IVR Default CP Only Conference Profile Settings Value Default Profile Settings in CP Conferencing ModeMCU Echo Suppression Default SVC Only Conference Profile Settings Value Default Profile Settings in SVC Only Conferencing ModeName Meeting Rooms Entry Queue Default SVC Only Conference Profile Settings Value Default Mixed CP and SVC Conference Profile Settings Value Default settings are as follows Name Viewing the List of Conference Profiles RMX Management pane, expand the Rarely Used list To list Conference ProfilesRMX Management pane, click the Conference Profiles button Conference Profiles Pane Columns Field Description Profiles Toolbar Modifying an Existing ProfileTo modify the Profile properties Defining New Profiles Deleting a Conference ProfileTo delete a Conference Profile To define a new Profile Guidelines for Exporting and Importing Conference Profiles Exporting and Importing Conference ProfilesExporting Conference Profiles Exporting All Conference Profiles from an MCU To export selected Conference Profiles Exporting Selected Conference Profiles To import Conference Profiles Importing Conference Profiles Using Conference Profiles Defining AVC CP Conferencing Profiles Defining AVC-Based Conference ProfilesTo define a new CP Profile RMX Management pane, click Conference Profiles Defining AVC-Based Conference Profiles Field/Option Description New AVC CP Profile General Parameters Profile Support in Video Switching Conferences New Profile Advanced dialog box opens Click the Advanced tabDefine the following parameters New AVC CP Profile Advanced Parameters Video Quality Optimized Resource Optimized For CP Conferences only Click the Gathering Settings tab Defining New Profiles New AVC CP Profile Gathering Settings Parameters New Profile Video Quality dialog box opens Click the Video Quality tab New AVC CP Profile Video Quality Parameters Resolution Configuration dialog boxHD720 HD1080 Information, see Multiple Content Resolutions 263 & H.264 Auto Selection 263Cascade Optimized SVC Video layout Manual Defining AVC-Based Conference Profiles 12+ Page Defining AVC-Based Conference Profiles Connection to improve call clarity Participants pane New AVC CP Profile Audio Settings Parameters For more details, see Automatic Muting of Noisy Endpoints New AVC CP Profile IVR Parameters Field/Option Description New AVC CP Profile IVR Parameters New Profile Recording dialog box opens New AVC CP Profile Recording Parameters Description Video/Voice Port Configuration MPMx New Profile Site Names dialog box opens Click the Site Names tabNew AVC CP Profile Site Names Parameters New AVC CP Profile Site Names Parameters Field Description Top RightTop LeftMiddle RightMiddle Selection Site Names Position Horizontal and Vertical Position adjustments usingPosition sliders New AVC CP Profile Site Names Parameters Define the following fields Defining AVC-Based Conference Profiles Service Name Click the Layout Indications tab Disableselfnetworkind Selfindlocation Gathering Phase Additional Information for Setting CP Profiles Gathering Phase Guidelines Partygatheringdurationseconds Range 0 3600 seconds Gathering Phase Duration Overlay Layouts Enabling the Gathering Phase Display Guidelines for using the Overlay Layouts Selecting the Overlay Layouts Site Names Definition Guidelines Shorten the Site Name Display Site Names Display Position Defining AVC-Based Conference Profiles  Same Layout mode Click the Message Overlay tab Select the Enable check boxSend Text Message to Participant dialog box is displayed Selecting the Chinese Font for Text Display To cancel the Message Overlay displaySelecting the Chinese Font To send text to selected participants Defining AVC-Based Conference Profiles To Create a Video Switching Profile Defining an AVC Video Switching Conference Profile Define the New Profile General parameters CIF New AVC VSW Profile General Parameters Minimum Threshold Line Rate System Flags High Profile Support in Video Switching ConferencesGuidelines Vswcifhpthresholdbitrate Vswsdhpthresholdbitrate Defining AVC-Based Conference Profiles Defining SVC and Mixed CP and SVC Conference Profiles By default, the Conferencing Mode is set to CPDefining SVC Conference Profiles To define SVC Only Profile New SVC Profile General Parameters Field/Option Description New Profile Advanced dialog box opens New SVC Profile Advanced Parameters Field/Option Description Define the following supported parameters New Profile Video Quality dialog box opens Use this option when most of the endpoints support H.263 Click the Video Settings tab Click the Audio Settings tab Click the IVR tab New SVC Profile IVR Parameters Field/Option Description  PCM Polycom, Inc 106 Parameter Description New SVC Profile Network Services Parameters Defining Mixed CP and SVC Conferencing Profiles To configure a mixed AVC and SVC conference Polycom, Inc 109 Video Display with CIF, SD and HD Video Connections Video Resolutions in AVC CP Conferencing High Profile Guidelines High Profile Support in CP Conferences  With Video Quality mode set to Motion HD1080p60 Resolution Guidelines CP Conferencing with H.263 4CIF CP Resolution Decision Matrix263 4CIF Guidelines Qcif CIF Video Resource Usage Resource-Quality Balanced defaultResource Optimized Video Quality Optimized HD720p60 HD1080p30HD720p30 CIF Modifying the Resolution Configuration Resolution Configuration for CP ConferencesMaximum Negotiated Line Rate for Resolutions Guidelines Resolution Configuration Maximum CP Resolution Pane Resolution Configuration BasicResolution Configuration Pane Limiting Maximum Resolution Sharpness Resolution sliders Motion Resolution sliders Resolution Configuration DetailedSharpness and Motion Resolution Configuration Sliders Sharpness mode Motion mode Polycom, Inc 122 Setting the Maximum CP Resolution for Conferencing Flag Settings Minimum Frame Rate Threshold for SD Resolution Additional Video Resolutions SIP W448p Resolution Content Enabling Support of the w448p ResolutionPacket Loss Compensation Isdn Collaboration Server System Flag Settings Additional Intermediate Video Resolutions Content Control Protocols Sharing Content During ConferencesGuidelines for Controlling Content Supported Content Control Protocols Content Sharing Using Bfcp Protocol Content Sharing Using H.239 ProtocolGuidelines for Using SIP Bfcp Content Dial-out System Flags Content Sharing Using People+Content ProtocolBfcp support in dial-in Connections UDP and TCP AVC non-TIP conferences Content RMX 1500/2000/4000 Profile Content Media ProtocolsMPMRx MPMx Base profile High profile Content Video Switching Content Transmission MethodsHighest Common Highest Common Calculation Depending on Content Settings Multiple Content ResolutionsFixed Rate Page MCU Usage Modes of Content Protocols Content SettingsCustomized Content Rate 263 263 & H.264 Auto Selection Cascade Optimized 264 HD 263 Content Sharing Properties263 & H.264 Auto Selection Cascade Optimized HD System Flags Content Settings Flag Name Range Default Guidelines for Sharing Content Using H.264 HDH264HDGRAPHICSMINCONTENTRATE H264HDHIGHRESMINCONTENTRATE Sharing Content in Cascaded Environments Content Sharing Related IssuesSending Content to Legacy Endpoints Content Display on Legacy Endpoints Guidelines for Sending Content to Legacy EndpointsSending Content to Legacy Endpoints in Telepresence Mode Guidelines for Sharing Content in Exclusive Content Mode Exclusive Content Mode Managing Noisy Content Connections Forcing Other Content Capabilities Defining Content Sharing Parameters for a Conference Useful Procedures in Content SharingTo set the content sharing parameters Content sharing Options Field Description Non-TIP Conferences Content sharing Options Cascade Optimized Content Sharing To Select the Customized Content Rate Selecting a Customized Content RateContent Settings list, select Customized Content Rate To enable Multiple Content Resolutions Sharing Content in Multiple Content Resolutions Mode Select Change To Content Token Owner in the drop-down menu Giving and Canceling Token Ownership AVC ParticipantsTo give token ownership To cancel token ownership Stopping a Content SessionTo end the current Content session Resolutions and Content Rate Reference Tables Content Sharing Reference TablesContent Rate Table Settings For RMX1800-0, maximum content resolution is HD1080p30 Resolution per Content Rate Tables Highest Common Content Bit Rate for H.264 Base Profile Highest Common Content Rates Tables Highest Common Content Bit Rate for H.264 High Profile Cascade Optimized Content Bit Rate for H.264 Base Profile Cascade Optimized Fixed Content Rates Tables Cascade Optimized Content Bit Rate for H.264 High Profile Media Encryption Guidelines Implementing Media Encryption for Secured Conferencing Implementing Media Encryption for Secured Conferencing Direct Connection to the Conference Connection to the Entry Queue Profile Setting Media encryption is enabled at three levelsEnabling Media Encryption for a Conference Recording Link Encryption To enable encryption at the conference level Setting the Encryption FlagsEnabling Encryption in the Profile To modify the Encryption flags Enabling Encryption at the Participant Level Monitoring the Encryption Status To enable encryption at the participant level Polycom, Inc 163 Collaboration Server Telepresence Mode Guidelines Setting Conferences for Telepresence Mode AVC CPParticipants using two RealPresence RPX HD 400 Room Systems System Level Horizontal Striping Automatic Detection of Immersive Telepresence ITP Sites Cropping Gathering Phase with ITP Room SystemsAspect ratio for standard endpoints Skins and Frames 10+ Polycom, Inc 168 Telepresence Display Decision Matrix Room Switch Telepresence Layouts Polycom, Inc 170 Reserved Screens Speaker Priority in CP Video LayoutsGrid Screens Video Layout Examples Polycom, Inc 172 Polycom, Inc 173 Selecting Speaker Priority Telepresence Mode LicenseAVC endpoints only Polycom, Inc 175 Enabling Telepresence Mode  Manual Monitoring Ongoing Conferences Monitoring Telepresence Mode None Monitoring Participant Properties Polycom, Inc 180 Enabling and Using Multiple Cascade Links RMX Telepresence Layout Mode Room Switch RMX Telepresence Layout Mode Continuous Presence figure Creating a Link Participant RMX Telepresence Layout Mode Continuous PresenceLink Participant in the Dial Out RMX For more information see To create a Link Participant in the dial-out RMX An Undefined Participant Link Participant Link in the Dial In RMX Disconnection Causes Monitoring Multiple Cascade LinksDefined Participant Link Polycom, Inc 187 Video Preview Additional Conferencing InformationVideo Preview Guidelines Workstation Requirements to Display Video Preview Testing your Workstation Previewing the Participant Video DirectX Diagnostic Tool dialog box opensTo preview the participant video Additional Conferencing Information To enable Auto Scan Guidelines for Using Auto Scan and Customized PollingAuto Scan and Customized Polling in Video Layout Enabling the Auto Scan and Customized Polling To define the scanning order in the Customized Polling tab Customized PollingCustomized Polling dialog box is displayed Customized Polling Dialog Box Command Buttons Description Packet Loss Compensation LPR and DBA Lost Packet RecoveryPacket Loss Enabling Lost Packet Recovery Monitoring Lost Packet Recovery Polycom, Inc 198 Network Quality Indication Layout IndicationsNetwork Quality Levels Displaying the Network Quality icons Indication Threshold ValuesCustomizing the Network Quality Icon Display Network Quality Icon Indication Threshold Flags Description Default no Disable the display of the Network Quality iconDisable the display of Network Quality icons displayed Default YES Audio Participants Indication Recording IndicationsRecording Recording Paused Layout Indications Icon Display Positions Polycom, Inc 204 Enabling Lecture Mode Lecture ModeSelecting the Conference Lecturer To automatically select the lecturer To automatically select a defined participant Enabling the Automatic Switching Lecture Mode Monitoring To control the Lecture Mode during an Ongoing Conference When enabled, the following rules apply Restricting Content Broadcast to Lecturer Muting Participants Except the Lecturer Enabling the Mute Participants Except Lecturer Option Audio Algorithm Support Guidelines Audio Algorithm SupportSIP Encryption Mono Stereo Audio algorithms supported for IsdnSupported Audio Algorithm vs Bitrate Minimum Bitrate kbps 722.1 16K 722 48K 722 56K 722 64K To view the participant’s properties during a conference Monitoring Participant Audio Properties Guidelines for Automatically Muting Noisy Endpoints Automatic Muting of Noisy Endpoints Automatic Muting of Noisy Endpoints at the Conference Level Automatic Muting of Noisy EndpointsYES Automatic Muting of Noisy Endpoints at the MCU Level To modify the system flag setting Permanent Conference Enabling a Permanent Conference Closed Captions Guidelines Closed Captions Enabling Closed Captions New Flag field enter EnableclosedcaptionTo change the flag value Defining Cascading Conferences Setting the Video Layout in Cascading conferencesCascading Link Properties Defining Cascading Conferences Play Tone Upon Cascading Link Connection Dtmf ForwardingFlags Controlling Cascading Layouts Basic Cascading Possible Cascading Topologies Dialing Directly to a Conference Basic Cascading Using IP Cascaded LinkDialing to an Entry Queue Basic Cascading Topology IP Cascading Link Automatic Identification of the Cascading Link Basic Cascading Using Isdn Cascaded LinkGateway to Gateway Topology Gateway to MCU/ MCU to Gateway Topology Gateway to Gateway Calls via Isdn Cascading Link Cascading Between Two MCUs Using an Isdn LinkMCU to MCU For example Gateway to MCU Calls via Isdn Cascading Link MCU to MCU Calls via Isdn Cascading Link Polycom, Inc 234 LPR Conference Profile Definition MCU Interoperability Table Defining Cascading Conferences Command box, enter H239OlcPatch System Flag SettingsSuppression of Dtmf Forwarding Master-Slave Cascading Star Cascading Topology Master-Slave Star Cascading Topology Conferences pane, select the conference To define the dial-out cascade participant linkMGC VSW HD New Participant Dial-out Cascade Link Field Description New Participant Dial-out Cascade Link Enablecascadedlinktojoinwithoutpassword flag to YES New Participant Dial-in Cascade Link Field Description To define a Dial-in Participant as the cascade link If a gatekeeper is used H.323 ID If a gatekeeper is used This field is left emptyIf a gatekeeper is not used Select E.164 digits 0-9, *, # Enabling Cascading Cascading via Entry QueueCascaded Conferences Star Topology To Define a Cascade-Enabled Entry Queue Creating the Cascade-enabled Entry Queue To define the Dial-out Cascaded Link Creating the Dial-out Cascaded LinkClick OK New Entry Queue enabling cascading is created Name field, enter a participant name Method B Method a To enable cascaded links to connect without a password Enabling Cascaded Conferences without PasswordSet the Enablecascadedlinktojoinwithoutpassword flag to YES Monitoring Star Cascaded Conferences Polycom, Inc 251 Advanced tab, in the Node Type field, select MCU Click OK Cascading Conferences H.239-enabled MIH Topology MIH Cascading Levels MIH Cascade a Sample 3-Level Cascading ConfigurationCascading Topologies Master Slave Conferences MIH Cascading Guidelines in CP LicensingMIH Cascade Levels MIH Cascading Master-Slave Relationship Video Session Mode, Line Rate and Video Settings RMX RMX CP HDRMX CP CIF RMX VSW HD Method MGC to RealPresence Collaboration Server Cascading Method  H263ANNEXT=YES default Setting Flags on the RealPresence Collaboration Server FORCE1X1LAYOUTONCASCADEDLINKCONNECTION=YES default To modify the flags Method II Defining the Cascading Entry Queue in the MGC Setting Flags in the MGCTo define the Cascading Entry Queue in the MGC Polycom, Inc 261 For Example 1002##12001##1234 Polycom, Inc 263 MGC HD VSW Defining the Cascading ConferencesHD VSW To define the Dial-out Participant Polycom, Inc 266 Polycom, Inc 267 Meeting Rooms Meeting Rooms List Use Time Out as Dtmf DelimiterMeeting Rooms are listed in the Meeting Room list pane Value / Description Flag Name Meeting Rooms List Columns Field Description To list Meeting Rooms Use Time Out as Dtmf Delimiter Automatic Password Generation Flags Meeting Room Toolbar & Right-click Menu To create a new meeting room Creating a New Meeting RoomMeeting Rooms pane, click the New Meeting Room Button or right-click an empty area Entry Queues Entry Queues, Ad Hoc Conferences and SIP Factories Default Entry Queue Properties Parameter Value Default Entry Queue propertiesDefining a New Entry Queue To define a new Entry Queue Entry Queue Definitions Parameters Option Description Shared Number Dialing Modifying the EQ Properties Listing Entry QueuesTransit Entry Queue To view the list of Entry Queues To cancel the Transit Entry Queue setting Setting a Transit Entry QueueTo designate an Entry Queue as Transit Entry Queue RMX Management pane, Rarely Used list, click Entry Queues Configuring the Collaboration Server as IVR Provider Guidelines for setting the Entry Queue as IVR ProviderEntry Queue IVR Service IVR Provider Entry Queue Shared Number Dialing Entry Queue Using External IVR Services via the MCCF-IVR Package Call Flow for Standalone SIP Endpoints Call FlowsCall Flow for Standalone TIP Endpoints Call Flow for TIP Endpoints from a Polycom ITP System To configure the Entry Queue for External IVR Services Configuring the Entry Queue to Use External IVR ServicesRMX Management pane, click Entry Queues Creating SIP Factories SIP FactoriesTo create a new SIP Factory RMX Management pane, Rarely Used list, click SIP Factories New Factory Properties Option Description Click OK New SIP Factory is added to the list Monitoring Registration Status Ad Hoc Conferencing Gateway to Polycom Distributed Media Application DMA Address Book Viewing the Address Book To expand the group to view the group members Participants List Pane InformationTo collapse a group » Double-click the group name or click the Collapse button Displaying and Hiding the Address Book Adding Participants from the Address Book Adding a Group from the Address Book to Conferences Participant GroupsManaging Groups in the Address Book To add a group to a new conference or an ongoing conference Address Book Navigation Action Description Select one of the following actions Adding a Participant to the Address Book Managing the Address BookAdding a New participant to the Address Book Directly To add a new participant to the Address Book New Participant General Field Description Only New Participant General IP only SIP Only New Participant Advanced Field Description Dial-out SIP Only AGC Guidelines for Substituting E.164 Number in Dial String Substituting E.164 Number in Dial String Modifying Participants in the Address Book When required, you can modify the participant’s propertiesTo modify participant properties in the Address Book To delete participants from the Address Book Deleting Participants from the Address Book To copy or move a participant to another group Copying or Moving a ParticipantCopy / Move Participant Function Description Filtering the Address Book Searching the Address BookPaste Participant Function Description To filter the data in an address book group Filtering Address Book Data Using a Predefined Pattern Filtering Address Book Data Using a Custom Pattern Polycom, Inc 310 To clear the filter and display all entries Clearing the Filter Obtaining the Display Name from the Address Book Exporting an Address Book Importing and Exporting Address BooksImporting an Address Book To Export an Address Book Integration with Resource Manager Upgrading and Downgrading Considerations RealPresence Collaboration Server Side Guidelines for Scheduling Reservations Scheduling ReservationsSystem Resources Reservations Toolbar Buttons Using the Reservation CalendarTo open the Reservation Calendar RMX Management pane, click the Reservation Calendar button Week View Reservations ViewsDay View Single day is displayed List View Today View To change between Week and Day views Changing the Calendar View To change to List View To view Today the current date Creating a New Reservation Scheduling Conferences Using the Reservation CalendarTo return to Calendar View Method III To interactively define the duration Open the Reservation Calendar To create a new reservationSelect a starting time slot New Reservation Reserved Resources Field Description All Reservations New Reservation Schedule Tab Field Description Recur every weeks field You can add participants from the Participants Address Book Managing Reservations Using the Week and Day views of the Reservations CalendarViewing and Modifying Reservations To change the Reservation’s Start time To move the Reservation to another time slotTo change the Reservation’s End time Reservation Properties General dialog box opens Adjusting the Start Times of all Reservations Scheduling Reservations Deleting Reservations Searching for Reservations using Quick SearchTo delete a single reservation To delete all recurrences of a reservation Clear the Quick Search field To clear the search and display all reservationsClick Search All Reservations are displayed Operator Conferences Operator Assistance & Participant Move Defining the Components Enabling Operator Assistance Operator Conference Guidelines New Conference IVR Service General dialog box opens New Conference IVR Service Welcome dialog box opens New Conference IVR Service Dtmf Codes dialog box opens Click the Video Services tab New Entry Queue IVR Service Conference ID dialog box opens New Entry Queue IVR Service Welcome dialog box opensClick the Operator Assistance tab To define a Conference Profile for an Operator Conference Click the Operator Conference check box To start a conference from the Conference pane Starting an Ongoing Operator Conference New Conference General Options Field Description Routing Name New Conference General Options To save an ongoing Operator conference as a template Saving an Operator Conference to a TemplateClick the Participants tab New Conference Participants dialog box opens Starting an Operator Conference from a Template Requesting Help Participant Alerts List Using Audible Alarms Audible Alarms Conference Templates Conference Template toolbar includes the following buttons Using Conference TemplatesConference Templates Toolbar Buttons Description Creating a new Conference Template from Scratch Creating a New Conference TemplateTo create a new Conference Template Conferences List toolbar includes the following button Conference Templates Polycom, Inc 354 New Participant General dialog box opens Click the New button New Participant Advanced dialog box opens Specify the Display Name and Duration New Conference Template Information dialog box opens To start an ongoing conference from a Template Starting an Ongoing Conference From a Template Conference is started To schedule a Reservation from a Conference Template Scheduling a Reservation From a Conference Template Polycom, Inc 362 Exporting and Importing Conference Templates Deleting a Conference TemplateTo delete Conference Templates Click the Delete Conference Template button. or Exporting All Conference Templates from an MCU Exporting Conference TemplatesTo export all Conference Templates from an MCU To export selected Conference Templates Exporting Selected Conference Templates To import Conference Templates Importing Conference TemplatesConference Templates Import dialog box is displayed Polycom, Inc 367 Polycom, Inc 368 Start a Conference To start an AVC CP conference from the Conference pane Start an AVC CP Conference from the Conferences Pane General Tab Support New Conference General tab parameters Field Description System Configuration Flags Polycom, Inc 374 New Conference Participants Tab Column / Button Description Participants Tab Option is disabled in SVC conferences To add participants from the Address Book Information TabAll Participants list opens New Conference Information Tab Field Description Media Sources Tab To start a SVC conference from the Conference pane To start a conference from the Reservation Calendar Scheduling an AVC-based Reservation Starting an Ongoing Conference From a Template This section is applicable for CP-AVC only conferences Conference Operations Conference and Participant Level OperationsCopy Conference Paste Conference To paste a conference as a new conference Paste Conference As Operational Buttons Participant OperationsParticipant Level Operations Menu Option Button Description Resume Video button Change to Regular Copy Participant Copy, Cut and Paste ParticipantCut Participant Paste Participant Paste Participant As Move Guidelines Moving Participants Between Conferences Moving a Participant Interactively Moving Participants Options Polycom Conferencing for Microsoft Outlook Setting up the Calendaring Solution Option 1 Using default Exchange Server settings Exchange Integration Configuration Option Field Description Option 2 Using an alternate Primary Smtp Mailbox Exchange Integration Configuration Option Option 3 Using modified Exchange Server settings Calendaring Guidelines Polycom, Inc 398 Creating a Conference Creating and Connecting to a Conference RealPresence Capture Server or Connecting to a Conference Collaboration Server Standalone Deployment Polycom Solution Support General Monitoring Conference and Participant Monitoring Multi-Selection Using the Chairperson Password for Filtering Click in the Chairperson Password field To search for an ongoing conference by Chairperson PasswordConference Level Monitoring Mixed Monitoring the Conference in the Conference List Pane Conferences Monitoring Information FieldDescription Displays conference name and type of conference To view the parameters of an ongoing CP conference Conference Properties General Field Description Following information is displayed in the General tab SVC Conference Properties General Following information is displayed in the Advanced tab Conference Properties Advanced dialog box opens Conference Properties Advanced Parameters End When Last Participant Remains parameters applyNone Prefer TIP Following information is displayed Profile Gathering Settings Field/Options Description Conference Properties Video Quality dialog box opens Information, see Video Resolutions in AVC CP Conferencing Customized Content Rate Click the Video Settings tab to list the video parametersConference Properties Video Quality Parameters AS-SIP For more information, see Supplemental Conferencing Features See Defining New Customized Polling Buttons Description Polycom, Inc 418 To view the parameters of an ongoing SVC conference Viewing the Properties of Ongoing SVC ConferencesConference Properties General Parameters Field Description Conference Properties General Parameters Last Participant Remains parameters apply Server RMX Network Port Usage Content Rate Polycom, Inc 424 Requesting Help Request to Speak is Request to Speak SDP Participant Level Monitoring Gatekeeper Status Call Admission Control Participant’s connection no indication is displayed Column Icon/Description Participant Monitoring Indicators and Properties Polycom, Inc 431 To view the participant Properties Viewing the Properties of Participants Following parameters are displayed for an IP participant Monitoring IP Participants Mute/Suspend Conference. See Conference and Participant Monitoring Polycom, Inc 436 Conference and Participant Monitoring Polycom, Inc 437 Milliseconds derived from the Rtcp report From the endpoint SIP Bfcp TCP Participant Connections Participant Properties Channel Status Advanced Parameters Conference and Participant Monitoring Conference and Participant Monitoring Channel Status tab Channel Status Advanced tab Monitoring SIP Bfcp Content Default Configuring the System FlagDetecting Endpoint Disconnection Detecting SIP Endpoint Disconnection Monitoring ISDN/PSTN Participants System Configuration FlagEndpoint Disconnection Detection Algorithm To view the participant properties during a conference Participant Properties H.221 Parameters Field Description Causes Polycom, Inc 451 ISDN/PSTN Participant Properties Channel Status Monitoring Telepresence Participant Properties Recording and Streaming Conferences Configuring the Collaboration Server to Enable Recording Defining the Dial Out Recording Link Default Recording LinkTo define a Dial Out Recording Link Recording Link Parameters Description Conference IVR Service Properties dialog box is displayed Enabling the Recording Features in a Conference IVR ServiceRealPresenceCaptureServerorRSS4000system IPAddress Recording Link Parameters ParameterDescription Enabling the Recording in the Conference Profile Conference Profile Recording Parameters Description To enable recording for a conference Click OK Recording is enabled in the Conference Profile Dial Out Recording Link Encryption Flag SettingDial Out Recording Link Encryption Dial Out Recording Link Encryption Guidelines Managing the Recording Process Dial Out Recording Link Settings Recording Layout To manage the recording process using the right-click menu Recording Participant Right-click Options Name Description Server or RSS 4000 system User Guide Conference Recording with Codian IP VCR Using Dtmf Codes to Manage the Recording ProcessMonitoring the recording participant Users, Connections, and Notes AdministratorCollaboration Server Users User Types Listing Users Adding a New User Administrators can add new users to the systemTo add a new user to the system RMX Management pane, click Users Users pane is displayed To associate a user with a machine Deleting a User To change a user’s password Changing a User’s PasswordTo disable a user Disabling a User Renaming a User To enable a userMachine Account To rename a user Monitoring Guidelines for defining a machine accountActive Directory Connections Using NotesViewing the Connections List To list the users who are currently connected to the MCU To open or edit a note To create a noteTo delete a note Collaboration Server IP Network Services Overview IP Network Services Management Network Primary Default IP Service Conferencing Service IPv6 Addressing Guidelines RMX Management pane, click the IP Network Services button To view or modify the Management Network ServiceModifying the Management Network Modify the following fields Default Management Network Service IP Field DescriptionManagement Network Properties Collaboration Server RMX Auto If selected, Site-Local and Global Click the Routers tab Default Management Network Service Routers Field Description Click the DNS tab Modify the following fields Default Management Network Service DNS Field DescriptionDNS DNS Servers Addresses Revocation Method Click the Security tab Modify the following fields URL To view or modify the Default IP Service Modifying the Default IP Network ServiceRMX Management pane, click IP Network Services Default IP Service Collaboration Servers RMX 1500/2000/4000 Default IP Network Service IP Field Description Default IP Service Collaboration Server RMX 4000 2000/4000 Polycom, Inc 489 Optional. Click the DNS tab IP Network Services Aliases To view or modify the ports values, click the Ports tab Fixed Ports If required, click the QoS tab System.cfg file View or modify the following fields TOS Click the SIP Servers tab SIP Servers Primary / Alternate Server Parameter Default IP Network Service SIP Servers Field Description Outbound Proxy Servers Primary / Alternate Server Parameter Username@domain name Modify the following fields To configure the ICE environment, click the SIP Advanced tab Network Service V35 tab Field Description Default IP Network Service SIP Advanced Field Description LAN Ethernet SettingsMNG B LAN MNG LAN To modify the automatic LAN port configuration RealPresence Collaboration Server RMX 1500/4000 RealPresence Collaboration Server RMX 4000 Do not select Ethernet Settings Parameters Field DescriptionRealPresence Collaboration Server RMX 1500 Do not select IP Network Monitoring To monitor signaling statusRMX CS IP tab displays the following fields IP Network Services Click the H.323 tab H.323 tab displays the following fields IP Network Services IP Network Services IP Network Services Media Redundancy LAN RedundancyMedia Redundancy on RealPresence Collaboration Server RMX Multipleservices = YES Lanredundancy Multipleservices = no LanredundancyMultipleservices = no Multipleservices = YES Multipleservices = no Lanredundancy = YES Signaling and Management RedundancyLAN Connections to the IP ports IP Port Description RMX 1800 Media Redundancy System Flags System Flag / Value = no Management Signaling LAN Hardware Monitor Indications Configuration RequirementsRealPresence Collaboration Server RMX RealPresence Collaboration Server RTM LAN Indications Status Description Network Traffic Control Http TCP RealPresence Collaboration Server RMX Network Port UsageHttps DNS UDP NTP SSH TCPUDP, TCP RTP SIP-TLSRtcp SIP -TLS ISDN/PSTN Network Services Overview Defining ISDN/PSTN Network Services Non Supported Capabilities and Conferencing Features Supported Capabilities and Conferencing Features To Add an ISDN/PSTN Network Service Adding/Modifying ISDN/PSTN Network ServicesRMX Management pane, click ISDN/PSTN Network Services Obtaining ISDN/PSTN required information Isdn Service Settings Field Description Unknown Span Definition Field Description Configured symmetrically Click Save & Continue Phones Settings Field Description To Modify an ISDN/PSTN Network Service Modifying an ISDN/PSTN Network ServiceClick Save & Close  MCU CLI  Dial-in Phone Numbers Network Security Multiple Network ServicesRealPresence Collaboration Server RMX 1500/4000 RealPresence Collaboration Server Network Security Polycom, Inc 534 That Include ICE Cards Up to 2 per Media Card Services Resource Allocation and Capacity First Time Installation and Configuration Upgrading to Multiple Services RealPresence Collaboration Server RMX Hardware Installation Polycom, Inc 539 Connecting the cables to the RTM LAN Connecting the cables to the RTM IPLAN Connections to the RTM IP RTM IP Port Description LAN Connections to the RTM LAN RTM LAN Port Description Polycom, Inc 541 LAN Connections to the RTM LAN RTM IP Port Description Management, media and signaling for Network Service System Flags and License Settings Collaboration Server ConfigurationMNG MNG B IP Network Service Definition Device Management pane, click IP Network Services To add new/additional Network Services Polycom, Inc 547 IP Network Service IP Parameters Field Description IP Network Service IP Parameters Following flags can be defined per service Service Configuration dialog box opens  H263ANNEXT Defined and the IP Network Service Default IP Network Service SIP Advanced FieldDescription Ethernet Settings Setting a Network Service as DefaultDefault IP Network Service Icons IconDescription Video/Voice Port and Resolution Configuration Signaling Host IP Address and MCU Prefix in GK IndicationsConference Profile Gateway Profiles Hardware Monitor Signaling MonitorConferencing Defining Dial Out Participants Reserving Video Resources for a Conference Monitoring Conferences Resource Report Port Usage Gauges NAT Network Address Translation Traversal Remote Connection Using the InternetDeployment Architectures Following Remote Connection call flow options are supported Remote Connections Enterprise Client Environment Registered Business to Business ConnectionsRegistered Environment VBP FW Firewall NAT Keep Alive To enable and modify FW NAT Keep Alive SIP TCP Keep-Alive System Configuration in SBC environments IVR Services List IVR ServicesTo view the IVR Services list IVR Toolbar buttons Button Button Name Descriptions IVR Services Toolbar To add a language Adding Languages To upload messages to the MCU Uploading a Message File to the Collaboration Server Properties General Voice Messages IVR Message Types by Message Category Defining a New Conference IVR Service Defining a New Conference IVR ServiceTo define a new Conference IVR Service Default is Conference IVR Service Properties Global Parameters Polycom, Inc 574 Chairperson Identifier Polycom, Inc 576 Message Type Description Conference IVR Service Properties General Voice Messages Indicating the recording status of the conference Followed by the Reorder Tone and disconnection Polycom, Inc 580 Ivrrollcallusetonesinsteadofvoice is set to YES , Ivrrollcallusetonesinsteadofvoice is set to YES, IVR Services Polycom, Inc 583 SIF 4SIFLow Dtmf Video Services Description New Conference IVR Service Dtmf Codes dialog box opens IVR Services IVR Services Change to Chairperson Defining a New Entry Queue IVR Service Entry Queue IVR ServiceTo set up a new Entry Queue IVR Service RMX Management pane, click IVR Services Fill in the following parameters Ad Hoc Conferencing and External Database Authentication Polycom, Inc 592 Select the voice messages New Entry Queue IVR Service General dialog box opens IVR Services Polycom, Inc 596 Default Conference IVR Service To select the default Conference IVR Service To modify the properties of an IVR Service To select the Default Entry Queue IVR Service Adding a Music File Replacing the Music FileTo replace the Music file To define the format settings for audio messages Defining the format settings for audio messagesCreating Audio Prompts and Video Slides Recording an Audio Message Sound Selection dialog box opens Format field, select PCM Click Convert NowAttributes list, select 16.000 kHz, 16Bit, Mono To record a new audio message Recording a new audio message IVR Services To create a welcome video slide Creating a Welcome Video Slide Error Handling Inviting Participants using DtmfInvite Call Flow Entering Additional Dtmf Codes Conference IVR Services dialog boxes Enabling the Invite Participants using Dtmf OptionGeneral Video Services Dtmf Codes Conference IVR Services General tab is displayed Disabled set to Off Disabling the Invite Participant Option To disable the Invite Participant option IVR Services Support with TIP Protocol External IVR Service ControlGuidelines for TIP Support with IVR Services Default IVR Prompts and Messages Change Password IVR Requests Chairperson help Menu IVR Services To control the volume of IVR music, Roll Call and messages Volume Control of IVR Messages, Roll Call and MusicDefault IVR Messages Flag Description IVR Services in TIP-Enabled Conferences Guidelines IVR Services in TIP-Enabled ConferencesEntry Queue and Virtual Entry Queue Access Configuring the Conference and Entry Queue IVR Services CDR File Properties Call Detail Record CDR UtilityCDR File Formats Unformatted CDR File Formatted CDR File Multi-Part CDR Files CDR File Contents Viewing the Conference Records Viewing, Retrieving and Archiving Conference InformationTo open the CDR utility Conference Record Fields Description Multi-part CDR File display Retrieving and Archiving Conference CDR Records Refreshing the CDR ListTo refresh the CDR list To retrieve and archive CDR records Gateway Functionality Gateway Calls IP Participants Call FlowsDirect Dialing Dialing from H.323 Endpoints Dialing from SIP Endpoints Optional Gateway IVR Dialing For IP Participants Dial-out Calls Direct Dialing Using IP Addresses Dial-in Calls Enabling or Disabling Direct IP Dialing Calling a SIP Endpoint in a Remote Domain Dialing via Gateway IVR for Isdn Participants Isdn ParticipantsDialing from ISDN/PSTN Endpoints Two dialing methods are available to ISDN/PSTN participants Calling an IP Endpoint via Gateway Pstn Dial-in Using GK Prefix Interoperability with DMA To define a new Conference IVR Service for gateway calls Defining the IVR Service for Gateway CallsRoll Call disabled Operator Assistance disabled Gateway Calls Details, see Disconnect on Busy DefaultGWWelcomeSlide Defining the Conference Profile for Gateway Calls Define the required settings for Encryption and LPRTo define a Conference Profile for Gateway Sessions To define a new Gateway Profile Defining the Gateway Profile Gateway Calls Redialing System Configuration Wrong Destination Number Time-out Wrong Destination NumberCall Failure Reasons H.323, SIP, Isdn Connection Indications Monitoring Ongoing Gateway SessionsDisconnect on Busy Disconnect on No Answer Gateway Session Name Gateway Session ParametersConference ID Connected Participant Parameters To set up the Meeting Room for direct dialing Polycom, Inc 645 Example Dialing to Polycom RealPresence DMA System Manual Dial String Entry Calling the RealPresence DMA via Gateway IVR Automatic Dial String Generation Enabling Pstn dial-in using GK prefix Pstn Dial-in Using GK PrefixConfiguration Pstn Participant input via Dtmf Deploying a Polycom RMX Serial Gateway S4GW RMX Manager Application Installing the RMX Manager Application Accessing or Downloading the RMX Manager Installer Click Install Downloading the Installation files from Polycom Support Site Accessing the RMX Manager Installer from the Login screen Installing the RMX Manager on Your WorkstationClick the Install RMX Manager link Polycom, Inc 655 To install the RMX Manager for Multiple Users Installing the RMX Manager for Multi-User Capability Polycom, Inc 657 Starting the RMX Manager Application To use the Windows Start menu To use the browserClick Start Programs Click All Programs Polycom RMX Manager To connect the RMX Manager to an MCU Connecting to the MCU MCUs Pane RMX Manager Main ScreenMCUs pane includes a list of MCUs and a toolbar MCU Icons and Statuses Icon Description Use Other RMX Manager UI Components Adding MCUs to the MCUs ListTo add a Collaboration Server unit MCU IP MCU Properties Field Description Grouping the Participants by MCU Start Monitoring/Stop Monitoring Modifying the MCU Properties Disconnecting an MCURemoving an MCU from the MCUs Pane Changing the RMX Manager Language Import/Export RMX Manager ConfigurationTo select a language To Import the RMX Manager Configuration To Export the RMX Manager ConfigurationExport RMX Manager Configuration dialog box opens Import RMX Manager Configuration dialog box opens To install the RMX Manager Installing RMX Manager in Secure Communication Mode Clear the Secured Communication check box Click the DNS tab Click on the Security tab Security dialog box is displayedDNS dialog box is displayed Enter the Local Domain Name Create a Certificate Request Click the Security tab Security dialog box is displayed Management Network Properties dialog box is displayedSelect the Secured Communication check box Click OK Reset the Collaboration Server Using an Internal Certificate AuthorityRMX Management pane, click Hardware Monitor Certificate Export Wizard is displayed Click the Copy to File buttonClick Next Export File Format dialog box is displayed Select Base-64 encoded X.509 .CER Polycom, Inc 676 Starting the RMX Web Client Use the RMX Web Client To start the Collaboration Server Web Client Viewing and System Functionality Permissions RMX Web Client Screen Components Auditor If you are logged in as a User with Chairperson permissions Conferences List RMX Management Pane List PaneStatus Bar Participant Alerts System Alerts Port Usage Gauges Address Book MCU State Dialing Direction Dial-in or Dial-out Displaying and Hiding the Address Book Displaying and Hiding Conference Templates Conference Templates Customizing the Main Screen To adjust column widthTo resize a pane To sort the data by any field column heading Increasing and Decreasing the Text Size To switch between Toolbar and List ViewsCustomizing the RMX Management Pane To increase or decrease the text size Polycom, Inc 690 System and Participant Alerts Administration and UtilitiesCollaboration Server 1500/1800/2000/4000 Status Bar To view the System Alerts list System Alerts Active Alarms Pane Columns Error occurredAn identifying number assigned to the system alert System Alerts Buttons To view the Participants Alerts list Participant Alerts Altering the clock RMX TimeTo Alter the MCU Time RMX Time Fields Properties Description RMX Time Fields Properties Resource Capacity Resource Management MPMx MPMRx-D Resource Usage in AVC CP Conferencing Resource Usage in SVC Conferencing MCU Capacities in Mixed CP and SVC ConferencingAudio Mode Resource Usage in Mixed CP and SVC Conferencing AVC Conferencing Video Switching Resource CapacityMPMRx 3333 Mixed CP MPMx Mixed CP AVC Conferencing Voice Resource Usage in AVC CP ConferencingResource Capacity Modes MPMx MPMRx Video/Voice Port Configuration MPMx Video/Voice Port Configuration MPMRxFlexible Resource Capacity Mode Forcing Video Resource Allocation to CIF Resolution Configuring the Video/Voice ResourcesTo allocate Voice resources Resource Reports To cancel the forcing of CIF resourceTo force CIF resource Mcmsparameters tab, click New Flag Displaying the Resource Report Main toolbar, select Administration Resource ReportResource Report Fields Parameters Column Description Port Gauges Port Gauge AVC HD AVC SD AVC CIF Collaboration Server 1800 Resource CapacityAVC HD AVC SD AVC CIF SVC Resource Capacity in Mixed Conferences Resource Capacity in Non-Mixed ConferencesPort consumption ratios of different calls HD720p HD1080p Collaboration Server 2000/4000 Resource Capacity ISDN/PSTN Polycom, Inc 711 Port Usage Threshold Setting the Port Usage ThresholdTo Set the Port Usage Threshold SIP Dial-in Busy Notification Port Usage Gauges Polycom, Inc 715 To view the System Information properties box System InformationSystem Information FieldDescription MIBs Management Information Base Snmp Simple Network Management ProtocolTraps MIB Files Support for MIB-II Sections Alarm-MIBMIB H.341 H.323 Standard MIBs Unified MIB Snmp Fields Name Type Description Unified MIB Code An Example of an Alarm Fault Trap An Example of an Authentication Failure TrapAn Example of a ColdStart Trap RMX MIB entities that do not generate traps Status Trap Administration and Utilities Defining the Snmp Parameters in the Collaboration Server To enable Snmp option Snmp Properties Traps dialog box opens Select the Traps tab Snmp SNMPv3 Traps Field DescriptionSHA SNMPv3 Traps Field Description Version Authentication Password Snmp Properties Security dialog box opens Select the Security tab Default MD5 Authentication Default EmptyEnter an Authentication Password Default DES Accepted Host IP Address dialog box opens Using Audible AlarmsSnmp Properties Security dialog box, click OK Audible Alarm Permissions Configuring the Audible AlarmsAudible Alarm Permissions Option Operator Administrator Stop Repeating Message Audible Alarm User Customization Options Description Replacing the Audible Alarm File Customizing the Multilingual Setting Multilingual SettingDownload Audible Alarm File window opens Banner Display and Customization To customize the Multilingual Setting Sample 1 Banner Non-Modifiable Banner Text Sample 3 Banner Sample 2 BannerSample 4 Banner Customizing Banners Banners Configuration dialog box opensTo customize the banners Customize the banners by modifying the following fields Banner Display Login Screen Banner Main Screen Banner Software Management Backup and Restore Guidelines To backup configuration files Using Software ManagementTo restore configuration files Select the Backup Directory Path and then click Backup Ping the Collaboration Server Using PingTo Ping a network entity from the Collaboration Server  OK or To configure the notifications Notification SettingsNotification Settings Parameters Field Description To access the Logger Diagnostic Files Logger Diagnostic FilesFollowing tasks can be performed Diagnostic File Button Options Description Logger Diagnostic Files dialog box, click BrowseTo Retrieve the Logger Files Information Collector Standard Security ModeTo View the Logger Files Click Retrieve Files Network Intrusion Detection System Nids Ultra Secure Mode Creating the Information Collector Compressed File Using the Information CollectorTo create the compressed file Click Collect Information Saving the Compressed File Auditor Files AuditorViewing the Compressed File To view the compressed file Retrieving Auditor Files To access Auditor Files Name To retrieve files for storage on a workstation Auditor File ViewerTo open the file in the Auditor File Viewer  StartUp To open the Auditor File Viewer from the Administration Menu Auditor Event Columns Field Description Alerts and Faults that are recorded by the Auditor Alerts and FaultsAlerts and Faults recorded by the Auditor Event Audit Events Alerts and Faults recorded by the Auditor Event Transactions that are recorded by the Auditor TransactionsTransactions recorded by the Auditor ActiveX Bypass Installing ActiveX To reset the RMX Resetting the Collaboration ServerClick Reset Administration and Utilities Modifying System Flags System Configuration FlagsTo modify system flags RealPresence Capture Server or RSS 4000 system recorder Manually Added and Deleted System FlagsMcmsparametersuser Flags Description Disableinactiveuser ContentspeakerintrasupEnableacceptingicmpredi Enableagc Enablecascadedlinktoj EnableautoextensionOinwithoutpassword Enablecyclicfilesystem Olume ForcesystembroadcastvForcesystemlisteningvo Lume Fillfromlastconfiguredspan FillfromfirstconfiguredspanIsdnresourcepolicy Itpcropping Legacyepcontentdefault LastloginattemptsMaxconfpasswordrepeat Layout Maxpasswordrepeapedc MaxcpresolutionMaxpasswordrepeatedch Maxintrarequestsperin Multipleservices MinpasswordlengthMcudisplayname Minpwdchangefrequenc Numofspecialchar NumofnumericNumofuppercasealphab Numericchairpassdefaul Numericconfidmaxlen NumericconfpassdefaultNumericconfidminlen LEN Passwordexpirationwarni PasswordexpirationdaysPasswordhistorysize Restrictcontentbroadca Example Ultrasecuremode SystemlisteningvolumeUsegkprefixforpstnca LLS Manually Added, Modified, Deleted System Flags Description To add a flagAcceptvoipdtmftype Is the preferred codec for SIP/Lync calls 42Kbps, fail, thus disconnecting the callManually Added, Modified, Deleted System Flags Flag Description Bytimers BlockcontentlegacyforBondinggroupdelay Burnbios Cascadelinkplaytoneon CfgkeyenableflowcontConnection Cellindlocation DELAYBETWEENH320DIALO TimerDisablecellsnetworkind Disabledummyregistratio Disableselfnetworkind DisablegwoverlayindicatDisablewiderestosipdi Enableciscogk Enableepc ENABLECONTENTOF768FOREnableflowcontrolrein Enableexternaldbacces Enablenovideoresource EnablemsfecEnablerecording Enablertptrafficshapin Enablesirenlpr EnablesipppcforallusEnablesirenlprsipencry Enabletcpackage Externaldbpassword ExternaldbloginExternaldbdirectory Externaldbip Forceaudiocodecforms ForceresolutionSinglecore Forceencryptionforund G728ISDN  Numericconfpassdefault LEN  Numericchairpass DefaultlenH239FORCECAPABILITIES H264HDGRAPHICSMINCONT Ignoreaim IPV6AUTOADDRESSCONFIGUIplinkenvironment Ipresponseecho For cascaded conferences For single MCU conferences Transcoding Possible values Default n Medianicmtusize MaximumrecordinglinksMinimumframeratethres Holdforsd Possible Values YES / no Portgaugealarm PasswordfailurelimitPcmfecc Pcmlanguage Pstnringingdurationsec Nnovideotimer REMOVEH323EPCCAPTONQosipaudio Qosipvideo Enable RtcpfirenableREMOVEH323HIGHPROFILE Captononpolycomvend Interval RtcpplienableRtcpqosisequaltortp Rtvmaxbitrateforforc Sendwiderestoip SendsrtpmkiSendwiderestoisdn Setaudioplc SetaudioclaritySetautobrightness Setdtmfsourcediffins Sipfastupdateintervale SipenablefeccSipbfcpdialoutmode Sipdualdirectiontcpco Sipfreevideoresources SocketactivitytimeoutSipomitdomainfrompart Yname Tclatencysize V35MULTIPLESERVICESTcpretransmissiontimeou Trafficshapingmtufacto Manually Added Csmoduleparameters System Flags Description Manually Adding Flags to the Csmoduleparameters Tab Qosipsignaling MsupdatecontacSiptcptlstimer Tremove Deleting a Flag Auto Layout ConfigurationTo delete a flag Available Layouts No. of Cells Layout Layout Flag Value Default Auto Layout is controlled by 13 flags Customizing the Default Auto Layout Polycom, Inc 807 Csenableepc Flag Legacyepcontentdefaultlayout FlagExample Enabling the Automatic Generation of Passwords Automatic Password Generation FlagsAutomatic Password Generation Flags Description Hideconferencepassword Default in Ultra Secure Mode Conference password must be Default in non-secured mode means no minimum lengthDefault in Ultra Secure Mode, Chairperson password must 16, 6 default non-secured mode Numericchairpass Default LEN Ultra Secure Mode Flag Ultra Secure Mode Polycom, Inc 813 Enabling Ultra Secure Mode Ultrasecuremode System Flag Modifying the Ultra Secure Mode System Flag ValuePCM To modify the Ultrasecuremode System flag value System Flags affected by Ultra Secure Mode Login and Session Management Range Default Network SecurityStrong Passwords User Management Enablecyclicfilesystemalarms YES/NO Range DefaultCertificate Management PKI Public Key Infrastructure Adding Certificates to the Certificate Repository To access the Certification Repository PKCS#7/P7B To add a certificate to the repository Trusted Certificates  Send Certificate File  Paste Certificate and Send CertificatePaste Certificate and Send Certificate Send Certificate File Polycom, Inc 822 To add a Personal Certificate to the Certificate Repository Personal Certificates Click Send Certificate Certificate Validation  General Error message from the SSL library Adding a CRL CRL Certificate Revocation List Select the Certificate File Format PEM or DER To add a CRL to the repository To remove a CRL Removing a CRL Revocation Method Certificate RevocationOne of three Certificate Revocation Methods can be selected  Global Responder URL Self-signed Certificate Creation Self-signed Certificate No Certificate Validation is performed SHA1 Self-signed Certificate Field Values Creation To perform an Emergency CRL Update procedure Emergency CRL Certificate Revocation List UpdateDownload and save the updated CRL files from the CA Server Disable Secure Communications mode Open the Certification Repository and Update the CRL files Re-enable Secured Communications Mode Update the repositoryRe-connect to the RMX Polycom, Inc 835 Siptcpkeepalivetype None SIP TCP Keep-AliveRFC5626 If its value is Reregistrationwhennopongresponse System Flags Siptcpkeepalivetype / Behavior Donotreregistrationwhennopongresponse DefaultFlag Possible Flag Values Siptcpkeepalivebehavior User and Connection Management Managing the user login process includesKeep Alive Frequency Managing system users includes User Types Managing the System UsersDisabling/Enabling Users Renaming Users Implementing Strong Passwords Managing the User Login ProcessPassword Character Composition Implementing Password Re-Use / History Rules Password LengthDefining Password Aging Forcing Password Change Defining Password Change FrequencyMaximum Repeating Characters Temporary User Lockout User Login RecordUser Lockout Session Timeout Connection TimeoutControlling User Sessions Management Sessions per System Erase Session History After Logout Guidelines for Customizing the Login Page Banner Polycom, Inc 847 Polycom, Inc 848 Polycom, Inc 849 Securing an External Database Standard Security Mode Ultra Secure ModeMS Active Directory Integration Directory and Database Options Guidelines Directory Services Configuration Field Description To configure Directory ServicesEnabling Active Directory Integration Directory Services Role Mapping dialog box is displayed Restoring the Collaboration Server Using the USB PortDirectory Services Role Mapping Field Description Click the Role Mapping tab FLASH-OVERRIDE-OVERRIDE Classified Networks only Mlpp Multi Level Precedence and PreemptionPrecedence Levels SIP Message Enabling PrecedenceDial-in calls FLASH-OVERRIDE-OVERRIDE Flash Immediate Priority Routine None  Domain Name = UC  Sub Domain =  r-priority = Incoming SIP No DefaultMessage UCC Precedence Level Change Dial-out calls Default Cleared Precedence disabled To configure Precedence SettingsOptional Modify the values if required Possible Values 1 Monitoring Precedence Level Precedence Settings Domains, Levels and Dscp ValuesSystem Flags Following 802.1X Authentication methods are supported Ieee 802.1X AuthenticationCertificate Repository PEAPv0 MSCHAPv2 802.1X Authentication Configuration Field Description Enabling and Configuring 802.1X AuthenticationDisable the 802.1X Authentication method EAP-MD5 Default Disabled 802.1X Authentication System Flags Flag name DescriptionRange YES/NO Disabling 802.1X Authentication White List AccessEthernet Monitoring Enabling, Disabling and Modifying the White List To enable, disable, view or modify the White List IP Address Modes Iii Click Yes to apply the modified White ListWorkstation / Device Alternative Network Address Types Anat DisabledSystem Flag Bfcp Over UDP AS-SIP Content Enabling AS-SIP Content System Flag Enablesendingicmpdestinationunreachable System Flag EnableacceptingicmpredirectInternet Control Message Protocol Icmp Upgrade / Downgrade Guidelines Password EncryptionModifying the flag values SIP UDP Polycom Non-hashed Passwords Self-signed Certificate Creation Field Value Media Encryption and Authentication Negotiation Protocol Authentication Tag Length Privacy Protocols Flag SettingsRange 80, 32 NGH Flag Value Viewing the Status of the Hardware Components Collaboration Server Hardware Monitoring HW Monitor Pane Status Columns Field Description To access Hardware Monitor Viewing the Properties of Hardware Components Diagnostics , or EmptyHW Monitor Pane Toolbar Critical Hardware Properties dialog box has the following structure To view the MCU PropertiesProperties MCU 1800 Properties General Info General information is displayed MCU Properties Event Log Column Description To view a card properties Mezzanine Card Properties General Info Field Description View Backplane Properties To view the supporting hardware components propertiesView FAN Properties Click Close to return to the Hardware Monitor pane Fans To view a LAN connector properties Temperature ThresholdsView LAN Properties To run Diagnostics on a card Diagnostic Mode Polycom, Inc 889 To exit the Diagnostics Mode IP Disconnection Causes Appendix a Disconnection CausesCall Disconnection Causes Description ARQ Call Disconnection Causes Description Is longer than the server is willing to interpret Request Isdn Disconnection Causes Number Summary Description Isdn Disconnection Causes Enquiry CUG Isdn Disconnection Causes Number Summary Description Mandatory information elements containing invalid content Active Alarms Alarm Code Alarm Description Appendix B Active AlarmsULTRASECUREMODE=YES Appendix B Active Alarms Active Alarms Alarm Code Alarm Description Active Alarms Alarm Code Alarm Description Active Alarms Alarm Code Alarm Description Active Alarms Alarm Code Alarm Description Active Alarms Alarm Code Alarm Description Install the appropriate media card Active Alarms Alarm Code Alarm Description Failure Active Alarms Alarm Code Alarm Description Active Alarms Alarm Code Alarm Description Conference Summary Record Appendix C CDR Fields, Unformatted FileConference Summary Record Fields Description Conference Summary Record Fields Standard Event Record Fields Event RecordsEvent Types CDR Event Types Event Code Event Name Description Event Specific Fields Participant Connected Recording UpdateLink SIP Private Extensions Gatekeeper User SET END User UpdateTime Operator Start Event Fields for Event 1 Conference Start Event Fields for Event 2001 Conference Start Continue Event Fields for Event 1 Conference Start Description Appendix C CDR Fields, Unformatted File Event Fields for Event 5001 Conference Start Continue Event Fields for Event 11001 Conference Start Continue Event Fields for Event 6001 Conference Start ContinueEvent Fields for Event 2 Conference END NTI TIE Trunk ATT Accunet Any other number Unknown Event fields for Event 4 ISDN/PSTN Channel Disconnected Event fields for Event 5 ISDN/PSTN Participant Connected Appendix C CDR Fields, Unformatted File Appendix C CDR Fields, Unformatted File Appendix C CDR Fields, Unformatted File Number of MCU Phone Numbers Terminal SIP URI Event fields for Event 15 H323 Call Setup Event fields for Event 15 H323 Call Setup Changed MCU Terminal Event Fields for Event 20 Billing Code Event Fields for Event 18 NEW Undefined Participant Event fields for Event 26 Recording Link Event Fields for Event 22 Dtmf Code Failure Event Fields for Event 30 Gatekeeper Information Event Fields for Event 28 SIP Private ExtensionsEvent fields for Event 31 Participant Connection Rate Event Fields for Event FieldDescription Characters Appendix C CDR Fields, Unformatted File Event Fields for Event 106 User SET END Time Is currently supported Isdn Polycom, Inc 946 Event Fields for Events 2011, 2012, Disconnection Cause ValuesEvent Fields for Event 3010 Participant Information VIP Disconnection Cause Values Value Call Disconnection Cause Disconnection Cause Values Value Call Disconnection Cause Disconnection Cause Values Value Call Disconnection Cause Conference is started using one of the following method Ad Hoc Conferencing without Authentication Ad Hoc Conference Initiation without Authentication Ad Hoc Conferencing with Authentication Polycom, Inc 953 Conference Access with External Database Authentication Conference Access Validation All Participants Always Conference Access Validation Chairperson Only Upon Request Ad Hoc Settings Authentication Settings Click OK Reset the MCU for flag changes to take effect To set the System Configuration flagsEnableexternaldbaccess Modify the values of the following flags Set the External Server Authentication field to » Set the External Server Authentication field to Numeric IDPage Details EndpointRTP Statistics Number of packets arriving out of order. Processing, but is not considered a faultFollowing details are displayed Certificate Configuration and Management Appendix F- Secure Communication ModeCertificate Template Requirements Configure Certificate Management Switching to Secure ModePurchasing and Installing a Certificate Certificate Requirements To enable secure communications mode Enabling Secure Communication ModeDefault for U.S. Federal licenses TLSV1 Creating/Modifying System Flags Polycom, Inc 967 Alternate Management Network Restoring Defaults Management Network Primary Configure the WorkstationAlternate Management Network 1500/2000/4000 To modify the workstation’s IP addresses Polycom, Inc 971 Page To connect directly to the Collaboration Server Connect to the Management NetworkCollaboration Server RMX Polycom, Inc 974 Collaboration Server RMX Connect to the Alternate Management Network 1500/2000/4000 To connect to the Alternate Management Network Procedure 2 Configure the Modem Procedure 1 Install the RMX ManagerProcedure 3 Create a Dial-up Connection Configure the modem with the following settings When the New Connection Wizard is displayed, click Next Polycom, Inc 979 Polycom, Inc 980 Connection Wizard To Connect using the RMX Manager To use the browser Procedure 4 Connect to the Collaboration ServerClick All Programs Overview Appendix H Deployment Into Microsoft Environments Deployment Architecture 2 RealConnect Cascaded Conferences Backward Compatibility to Lync Video Resource Requirements and Implications Support for HD1080p Resolution Limit Maximum Resolution for MS SVC Using a System flag FEC Forward Error CorrectionDefault Auto IPv6 Support System Flags for Cropping Control Range Default RealPresence CSS Gateway Sharing Content During a ConferenceRealPresence CSS Plug CSS Gateway Usage Guidelines Lync CSS Behavior by Lync Content Type CSS Plug CSS Gateway Cisco TIP Support MLA Mode Collaboration Server Side Lync 2013 Avmcu SideLync 2013 Participant Monitoring Mainandinslave Monitoring Participant Properties Channel Status Tab Polycom, Inc 994 Look and Feel Deployment Architecture 1 RealPresence Hosted Conferences Deployment Architecture 2 RealConnect Cascaded Conferences Look and Feel for Legacy Endpoints Look and Feel for Lync Clients and Group Series Endpoints Video Optimized Remove Empty Cells From the Video Layout Handle Low Bit Rate Calls From the AvmcuCase Range Polycom, Inc 1000 Meet Now Lync Conference Initiate and Connect to a ConferenceRealConnect for Lync To connect to an Avmcu conference Call Admission Control Video Switching ConferencesConferencing Behavior Continuous Presence Conferences Monitoring Participant Connections Active Alarms Active Alarms and Troubleshooting ICE Active Alarms Known Issues TroubleshootingURI Polycom, Inc 1007 Appendix I Polycom Open Collaboration Network Pocn Single Company Model Polycom and Cisco Infrastructure Deployment Architectures IOS Ctms Solution Architecture Components Version DescriptionVCS Polycom Equipment MLA Multipoint call with DMA Call Flows Multipoint call without DMA Model Company to Company Models Using a Service ProviderModel Collaboration Server Cisco telephony and desktop endpoints Company to Company via Service Provider Model Call Flow Multipoint call via Service Provider Model Polycom, Inc 1018 Company a Company B Solution Architecture Components Cisco EquipmentCompany B Deployment architecture includes Polycom, Inc 1020 Configuring the Cisco and Polycom Equipment AdministrationGatekeepers Polycom Equipment Cisco EquipmentSupported Polycom products Polycom TIP and SIP Versions SIP only no TIP support Versions Configuring DMA Configuring the Collaboration ServerConfiguring Endpoints Set the Mintipcompatibilitylinerate System Flag Entry Queue and Virtual Entry Queue Access Configuring Entry Queues and IVR ServicesConfiguring the Conference and Entry Queue IVR Services Endpoints Registered to Cucm Procedure 1 Set the Mintipcompatibilitylinerate System Flag SIP Server field, select Specify TIP HD Video Resolution by Line RateOutbound Proxy Servers table Polycom, Inc 1027 Polycom, Inc 1028 Polycom, Inc 1029 Polycom, Inc 1030 Polycom, Inc 1031 Polycom, Inc 1032 Polycom Immersive Telepresence Systems ITP Version Content Sharing BehaviorPolycom video conferencing endpoints HDX Version Cisco TelePresence System CTS Versions 1.7 Polycom, Inc 1034 Collaboration with Microsoft and Cisco  Cucm  RTV 720p Cisco TelePresence System CTS Versions  CTS HDX RSS RealPresence Capture ServerDMA Cmad ITP OTX, RPX, ATX, TPX Microsoft Cisco Multipoint Calls using DMA Microsoft Lync Server Solution Interoperability Table SP2 CU4 Supported Resolutions Supported TIP Resolutions and Resource AllocationTIP Layout Support & Resource Usage Resource Allocation To configure the Microsoft, Cisco and Polycom components Configuring the Microsoft, Cisco and Polycom Components  Appendix H Integration Into Microsoft Environments Register the ITP endpoints to the Lync server Polycom, Inc 1046 Polycom, Inc 1047 Flow Control Via H.239 Encryption TIP Compatibility Prefer TIP Content Receiver A new or existing Profile, click the Advanced tab To enable Dtls negotiation for content encryption Polycom, Inc 1051 Resolution Configuration Content XGA,5fps No Content Video and Content Endpoint Registration LyncEndpoints HDX to Collaboration HD H.264 Video Server Monitoring Operations During Ongoing ConferencesCTS Participants Participant Properties General dialog box opens Polycom, Inc 1055 Lync Participants RTV Known Limitations Polycom, Inc 1058 Perform a Standard Restore Appendix J Restore DefaultsStandard restore deletes the following files Restore Factory Defaults dialog, select Standard Restore To perform a Standard Restore using the RMX Web Client Perform a Comprehensive Restore To perform a comprehensive restore using the RMX Web Client Optional. Back up the system configuration Select Open Folder to view files using Windows Explorer To perform a comprehensive restore using the USB key MD5 Appendix K SIP RFC SupportRsvp Srtp Appendix K SIP RFC Support Traffic Shaping Guidelines Appendix L Media Traffic Shaping Capacity Reduction During Traffic Shaping System FlagsHD1080p Audio Only Flag name Siptimerssetindex 323 & SIP Flag SettingsAppendix M Homologation for Brazil 323 & SIP Protocol Flag Options Flag name Disabledummyregistration Flag name H323TIMERSSETINDEX