Polycom 1500/1800/2000/4000 manual To add a flag, Acceptvoipdtmftype

System Configuration Flags

To add a flag:

1In the System Flags dialog, click New Flag. The New Flag dialog box is displayed.

2In the New Flag field enter the flag name.

3In the Value field enter the flag value.

The flags in the Manually Added, Modified, Deleted System Flags table can be manually added to the MCMS_PARAMETERS_USERS tab.

4Click OK to close the New Flag dialog. The new flag is added to the flags list.

5Click OK to close the System Flags dialog.

Unless indicated otherwise, reset the MCU is required for flag changes (including deletion) to take effect. For more information see Resetting the Collaboration Server.

:

Manually Added, Modified, Deleted System Flags

Flag	Description
ACCEPT_VOIP_DTMF_TYPE	Defines the type of DTMF tones (inband) or digits (outband) that the
	Collaboration Server will accept in VOIP calls.
	Range:
	•	0	- Auto (default):
		Inband or outband DTMF tones/digits are accepted depending on the
		endpoint's current setting. If the endpoint switches from inband to
		outband, and vice versa, the value of the
		SET_DTMF_SOURCE_DIFF_IN_SEC flag determines the time interval
		after which both inband and outband tones/digits will be accepted.
	•	1	- Outband (H.245) only
	•	2	- Inband only

Polycom®, Inc. 777