Polycom 1500/1800/2000/4000 Blockcontentlegacyfor, Lync, Bondingdialingmethod, Sequential, Group

		System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
BLOCK_CONTENT_LEGACY_FOR	This flag is used to control the system behavior in an environment where
_LYNC	some Lync clients use the Polycom CCS plug-in and some do not.
	When set to NO (default), Content is sent to all Lync clients over the video
	channel, including those with the plug-in installed, even when the Send
	Content to Legacy Endpoints is disabled. Other, non-Lync legacy endpoints
	will not be affected by this flag and will receive content according to the
	Send Content to Legacy Endpoints settings in the conference Profile.
	When set to YES, Content is not sent to Lync clients over the video channel
	including those with the Polycom CCS plug-in installed, even when the
	Send Content to Legacy Endpoints is enabled. Other, non-Lync legacy
	endpoints will not be affected by this flag and will receive content according
	to the Send Content to Legacy Endpoints settings in the conference Profile.
BONDING_DIALING_METHOD	When set to:
	•	SEQUENTIAL
		The MCU initiates channel connections sequentially until it reaches the
		number of channels defined by the
		BONDING_NUM_CHANNELS_IN_GROUP flag.
		When a channel is connected, dialing begins for the next channel in the
		group.
	•	BY_TIMERS
		The MCU initiates channel connections sequentially using the values of
		the BONDING_CHANNEL _DELAY and BONDING_GROUP_DELAY
		flags.
		The first group of channels is dialed, using the
		BONDING_CHANNEL_DELAY between dialing attempts for each
		channel in the group.
		The Collaboration Server then implements the
		BONDING_GROUP_DELAY, before dialing the first channel of the next
		group.
	Default: SEQUENTIAL
BONDING_GROUP_DELAY	When connecting several bonding groups, this is the delay (number of
(ISDN)	1/100 seconds) preceding the first dialing attempt to connect the next
	bonding group.
	Default: 500
BONDING_NUM_CHANNELS_IN_	The number of channels in the bonding group to be connected before
GROUP	dialing the next sequential channel.
(ISDN)	Default: 50
BURN_BIOS	Although not recommended, setting this flag’s value to NO will prevent
	BIOS upgrade.
	Default: YES.
CAC_ENABLE	When set to YES, enables the Call Admission Control implementation in the
	Collaboration Server.

Default: NO (CAC is disabled)

Polycom®, Inc. 779