Polycom 1500/1800/2000/4000 manual Defining the Snmp Parameters in the Collaboration Server

Administration and Utilities

Defining the SNMP Parameters in the Collaboration Server

The SNMP option is enabled via the Collaboration Server Web Client application.

The addresses of the Managers monitoring the MCU and other security information are defined in the Collaboration Server Web Client application and are saved on the MCU’s hard disk. Only users defined as Administrator can define or modify the SNMP security parameters in the RMX Web Client application.

To enable SNMP option:

1In the RMX Web Client menu bar, select Setup > SNMP. The RMX SNMP Properties - Agent dialog box is displayed.

This dialog box is used to define the basic information for this MCU that will be used by the SNMP system to identify it.

2In the Agent dialog box, select the SNMP Enabled check box.

3Click Retrieve MIB Files to obtain a file that lists the MIBs that define the properties of the object being managed.

The Retrieve MIB Files dialog box is displayed.

4Click Browse and navigate to the desired directory to save the MIB files.

5Click OK.

The path of the selected directory is displayed in the Retrieve MIB Files dialog box.

6Click Save.

The MIB files are saved to the selected directory.

7Click Close to exit the Retrieve MIB Files dialog box.

8In the Agent dialog box, define the parameters that allow the SNMP Management System and its user to easily identify the MCU.

Polycom®, Inc. 724