Polycom 1500/1800/2000/4000 Sipbfcpdialoutmode, Sipdualdirectiontcpco, Sipenablefecc, Rredcom

		System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
SIP_BFCP_DIAL_OUT_MODE	Controls BFCP’s use of UDP and TCP protocols for dial-out SIP Client
	connections according to its value:
	•	AUTO (Default)
		If SIP Client supports UDP, TCP or UDP and TCP:
		- BFCP/UDP is selected as Content sharing protocol.
	•	UDP
		If SIP Client supports UDP or UDP and TCP:
		- BFCP/UDP selected as Content sharing protocol.
		If SIP Client supports TCP
		- Cannot share Content.
	•	TCP
		If SIP Client supports TCP or UDP and TCP
		- BFCP/TCP selected as Content sharing protocol.
		If SIP Client supports UDP
		- Cannot share Content.
SIP_DUAL_DIRECTION_TCP_CO	In environments set to integration with Microsoft, if set to YES the system
N	sends a new request on the same TCP connection (instead of opening a
	new one).
SIP_ENABLE_FECC	By default, FECC support for SIP endpoints is enabled at the MCU level.
	You can disable it by manually adding this flag and setting it to NO.
SIP_FAST_UPDATE_INTERVAL_E	Default setting is 0 to prevent the Collaboration Server from automatically
NV	sending an Intra request to all SIP endpoints.
	Enter n (where n is any number of seconds other than 0) to let the
	Collaboration Server automatically send an Intra request to all SIP
	endpoints every n seconds.
	It is recommended to set the flag to 0 and modify the frequency in which the
	request is sent at the endpoint level (as defined in the next flag).
SIP_FAST_UPDATE_INTERVAL_E	Default setting is 6 to let the Collaboration Server automatically send an
P	Intra request to Microsoft OC endpoints only, every 6 seconds.
	Enter any other number of seconds to change the frequency in which the
	Collaboration Server send the Intra request to Microsoft OC endpoints only.
	Enter 0 to disable this behavior at the endpoint level (not recommended).
SIP_FORMAT_GW_HEADERS_FO	Controls whether the RMX adds special gateway prefix and postfix
R_REDCOM	characters to the user portion of the SIP URI expressed in the From and
	Contact headers of SIP messages sent during calls involving Gateway

Services. The addition of these characters can result in call failures with some SIP call servers. It is recommended to set this flag to YES whenever the RMX is deployed such that it registers its conferences to a SIP call server.

Range: YES, NO

Default: NO

Polycom®, Inc. 800