Polycom 1500/1800/2000/4000 1023, 1035, 1036, Multipoint Calls using DMA 1039, 1040, 1054

Contents
Configuring the Collaboration Server	1023
Configuring DMA	1023
Configuring Endpoints	1023
Configuring Entry Queues and IVR Services	1024
Guidelines	1024
Content	1024
Procedure 1: Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag . . . .	1025
Procedure 2: Configuring Collaboration Server to statically route outbound
SIP calls to DMA or CUCM	1026
Procedure 3: Configuring the Collaboration Server’s H.323 Network Service
to register with DMA gatekeeper	1027
Procedure 4: Configuring a TIP Enabled Profile on the Collaboration Server . . . .	1028
Content Sharing Behavior	1033
Procedure 5: Configuring an Ad Hoc Entry Queue on the Collaboration Server
if DMA is not used	1034
Procedure 6: Configuring a Meeting Room on the Collaboration Server	1034
Procedure 7: Configuring Participant Properties for dial out calls	1034
Collaboration with Microsoft and Cisco	1035
Deployment Architecture:	1036
Call Flow	1039
Multipoint Calls using DMA	1039
Administration	1040
DMA	1040
Microsoft Lync Server	1040
CUCM	1040
Solution Interoperability Table	1040
TIP Layout Support & Resource Usage	1042
Supported TIP Resolutions and Resource Allocation	1042
Supported Resolutions	1042
Resource Allocation	1042
Configuring the Microsoft, Cisco and Polycom Components	1043
Content Sharing Behavior	1048
Encryption	1049
Guidelines	1049
Resolution Configuration	1052
Endpoints	1053
Content	1053
Operations During Ongoing Conferences	1054
Monitoring	1054
CTS Participants	1054
Lync Participants (RTV)	1056

Polycom, Inc. xxviii