Polycom 1500/1800/2000/4000 manual Manually Added and Deleted System Flags

System Configuration Flags

6Repeat steps 2–5 to modify additional flags.

7Click OK to close the System Flags dialog.

8If not otherwise indicated, reset the MCU for flag changes (including deletion) to take effect. For more information see Resetting the Collaboration Server.

Manually Added and Deleted System Flags

MCMS_PARAMETERS_USER Flags

Flag	Description
ALLOW_NON_ENCRYPT_RECOR	When set to NO (default), the Recording Link inherits the encryption
DING_LINK_IN_ENCRYPT_CONF	settings of the conference. If the conference is encrypted, the recording link
	will be encrypted.
	When set to YES, it disables the encryption of the recording link,
	regardless of the Encryption settings of the conference and
	RealPresence Capture Server or RSS 4000 system recorder.
BONDING_CHANNEL_DELAY	When connecting a bonding group, this is the delay (number of 1/100
	seconds) between dialing attempts to connect sequential channels.
	The channel per second connection performance of ISDN switches can
	vary and can cause timing issues that result in bonding channel
	disconnection.
	Default: 50
CHANGE_AD_HOC_CONF_DURAT	The duration of an ad-hoc conference* can be configured on a system level
ION	by setting the flag to one of the following values (in minutes): 60 (default),
	90, 180 and 270.
	* An ad-hoc conference is automatically created when the participant dials
	into an Ad-hoc Entry Queue and enters a conference ID that is not being
	used by any other conferencing entity. It is based on the Conference Profile
	assigned to the EQ.
CONTENT_SLAVE_LINKS_INTRA_	Defines the interval, in seconds, during which the Collaboration Server is
SUPPRESSION_IN_ SECONDS	allowed to forward an Intra Request received from any of the Slave
	Cascading Links. The Slave Cascading Link can be connected to the local
	Collaboration Server, to an MCU on a higher cascade level or to the
	Content sharer.
	The first Intra request that is received from any of the Slave MCUs
	connected to the Collaboration Server starts the interval counter and is
	forwarded to the next level MCU or to the Content sharer.
	All other Intra requests that are received within this interval are registered
	but ignored. After an interval of <flag value> seconds, the system checks if
	during the last interval any additional Intra requests were registered. If
	there is at least one Intra request it will be forwarded. If there is no
	additional Intra request not no action is taken other than to wait for the next
	cycle.
	This filtering process is repeated every <flag value> seconds.
	Default: 30

Polycom®, Inc. 763