Polycom 1500/1800/2000/4000 manual Dialing to Polycom RealPresence DMA System, Example

Gateway Calls

Dialing to Polycom® RealPresence DMA System

Two dialing methods are available to ISDN/PSTN participants calling the DMA:

●Direct with automatically generated destination dial strings from dial-in strings. This option is available only to Collaboration Servers with MPMx cards.

●Via Gateway IVR.

In addition, PSTN participants can dial the Gateway IVR and can use the MCU or DMA prefix in the gatekeeper together with the conference ID/endpoint alias as the destination string to simplify the input. This is one of the methods for PSTN participants to connect to a virtual Meeting Room on the DMA. For more details, see PSTN Dial-in Using GK Prefix.

Calling a RealPresence DMA Direct with Automatically Generated Destination Dial Strings

In this configuration, the gateway session initiator enters one of the dial-in numbers assigned to the gateway profile. This number is truncated by the Collaboration Server gateway and the truncated digits are replaced by a prefix that corresponds either to the DMA prefix in the Gatekeeper.

Call Flow from ISDN Endpoint to Polycom DMA with Automatically Generated Forwarded Dial String

Example:

The figure above shows the call flow assuming the following parameters:

First Dial-in Number	5705550
Last Dial-in Number	5705560
Use Dial-in Numbers as Destination ID	Selected
DMA Meeting Room ID	5555
Destination Prefix (DMA prefix in Gatekeeper)	26
Number of Rightmost Digits to Append	4

Polycom®, Inc. 646