HP CM2320 manual Where to look for jams, Clear jams in tray

Models: CM2320

1 292
Download 292 pages 35.68 Kb
Page 220
Image 220

Where to look for jams

Jams can occur in these locations:

In the automatic document feeder (ADF)

In input areas

In the automatic duplexer (where applicable)

In output areas

Inside the product (paper path)

Find and remove the jam by using the instructions on the following pages. If the location of the jam is not obvious, first look inside the product.

Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have been printed.

Clear jams in tray 1

NOTE: If the sheet tears, make sure that all of the fragments are removed before you resume printing.

Pull the jammed sheet from tray 1.

If paper has entered far enough into tray 1, remove tray 2, drop the tray 1 plate down, and then remove the paper from the opening.

Clear jams in tray 2

1.Pull out tray 2 and place it on a flat surface.

208 Chapter 15 Problem solve

ENWW

Page 220
Image 220
HP CM2320 manual Where to look for jams, Clear jams in tray