2.Clean the white document lid backing by using a soft cloth or sponge that has been moistened with a mild soap and warm water. Wash the backing gently to loosen debris; do not scrub the backing.

3.Also, clean the scanner strip next to the ADF scanner glass.

4.Dry the backing by using a chamois or soft cloth.

CAUTION: Do not use paper-based wipes because they might scratch the backing.

5.If this does not clean the backing well enough, repeat the previous steps and use isopropyl alcohol to dampen the cloth or sponge, and then wipe the backing thoroughly with a damp cloth to remove any residual alcohol.

Clean the scanner glass

Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the accuracy of special features such as fit-to-page and copy.

NOTE: If streaks or other defects appear only on copies produced using the automatic document feeder (ADF), clean the scanner strip (step 3). It is not necessary to clean the scanner glass.

1.Turn off the product, unplug the power cord from the electrical socket, and raise the lid.

ENWW

Manage supplies 195

Page 207
Image 207
HP CM2320 manual Clean the scanner glass