Use scan

Scan methods

Scan jobs can be performed in the following ways.

Scan from the computer by using HP LaserJet Scan (Windows)

Scanning by using HP Director (Macintosh). See Scan on page 42.

Scan from the product

Scan from TWAIN-compliant or Windows Imaging Application (WIA)-compliant software

NOTE: To learn about and use text-recognition software, install the Readiris program from the software CD-ROM. Text-recognition software is also known as optical character recognition (OCR) software.

Scan from the PC

1.In the HP program group, select Scan to start HP LaserJet Scan.

NOTE: Pressing Start Scan on the product control panel also starts HP LaserJet Scan.

2.Choose the action that you want to accomplish.

Select a destination to begin scanning immediately.

Select Scan after prompting me for settings to specify additional settings before you begin scanning.

Select Set up the device to program scan destinations for scanning directly from the device. This functionality is available under the Scan menu on the device.

3.Click OK.

NOTE: OK should indicate the action that you want to accomplish.

Scan from the product

Scan directly from the product by using the control-panel scan buttons. Press Start Scan or Scan Menu to scan to a folder (Windows only) or to scan to e-mail.

Use the Scan feature

Scanning from the product control panel is only supported with a full software installation.

HP ToolboxFX must be running to scan by using the Scan Menu button or the Start Scan button.

For the best scan quality, place your originals onto the flatbed scanner, rather than loading them into the automatic document feeder (ADF) input tray.

The computer that is connected to the product must be turned on.

100 Chapter 11 Scan

ENWW

Page 112
Image 112
HP CM2320 manual Use scan, Scan methods, Use the Scan feature, Scan from the PC, Scan from the product