HP CM2320 manual Copy problems, Prevent copy problems

Models: CM2320

1 292
Download 292 pages 35.68 Kb
Page 239
Image 239

Problem

Cause

Solution

 

 

 

Pages did not print.

The product might not be pulling media

See Media-handling problems on page 224.

 

correctly.

 

 

 

 

 

The media might be jamming in the product.

Clear the jam. See Clear jams on page 207.

 

 

 

 

The USB cable or the network cable might be

Disconnect the cable at both ends and

 

defective or incorrectly connected.

reconnect it.

 

 

Try printing a job that has printed in the

 

 

past.

 

 

Try using a different USB or network

 

 

cable.

 

 

Verify that you are using a certified USB

 

 

2.0 cable.

 

 

 

 

The product IP address might have been

From the control panel, print a configuration

 

changed.

page. Confirm the IP address with that listed in

 

 

the Product setting dialog box.

 

 

 

 

The product might not be set up as the default

Open the Printers or Printers and Faxes

 

printer.

dialog box, right click the product, and then

 

 

click Set as Default Printer.

 

 

 

 

The product might have encountered an error.

Check the control panel for an error message.

 

 

See Control-panel messages on page 203.

 

 

 

 

The product might be paused or offline.

Open the Printers or Printers and Faxes

 

 

dialog box, and verify that the product status is

 

 

Ready. If it is Paused, right-click the product

 

 

and click Resume Printing.

 

 

 

 

The product might not be receiving power.

Check the power cord and verify that the

 

 

product is turned on.

 

 

 

 

Other devices are running on your computer.

The product might not share a USB port. If you

 

 

have an external hard drive or network

 

 

switchbox that is connected to the same port

 

 

as the product, the other device might be

 

 

interfering. To connect and use the product,

 

 

disconnect the other device or use two USB

 

 

ports on the computer.

 

 

 

Copy problems

Prevent copy problems

The following are a few simple steps you can take to improve copy quality:

Copy from the flatbed scanner. This will produce a higher quality copy than copying from the automatic document feeder (ADF).

Use quality originals.

Load the media correctly. If the media is loaded incorrectly, it might skew, causing unclear images and problems with the OCR program. See Load paper and print media on page 59 for instructions.

Adjust the control panel settings for the type of original if the automatic settings do not produce the desired result.

ENWW

Solve image-quality problems 227

Page 239
Image 239
HP CM2320 manual Copy problems, Prevent copy problems