HP CM2320 manual Clean the paper path from HP ToolboxFX

Models: CM2320

1 292
Download 292 pages 35.68 Kb
Page 204
Image 204

Clean the paper path from HP ToolboxFX

Use HP ToolboxFX to clean the paper path. This is the recommended cleaning method. If you do not have access to HP ToolboxFX, use the process from the control panel.

1.Make sure that the product is turned on and in the Ready state, and that media is loaded in tray 1 or tray 2.

2.Open HP ToolboxFX, click the product, and then click the System Settings tab.

3.Click the Service tab, and then click Start.

A page feeds through the product slowly. Discard the page when the process is completed.

Clean the paper path from the product control panel

If you do not have access to HP ToolboxFX, you can print and use a cleaning page from the product control panel.

1.Press Setup.

2.Use the arrow buttons to find the Service menu, and then press OK.

3.Use the arrow buttons to find Cleaning mode, and then press OK.

4.Load plain letter or A4 paper when you are prompted.

5.Press OK again to confirm and begin the cleaning process.

A page feeds through the product slowly. Discard the page when the process is completed.

Clean the automatic document feeder (ADF) pickup roller assembly

If the ADF has trouble feeding documents, clean the ADF pickup roller assembly.

1.Turn off the product and unplug the power cord.

192 Chapter 14 Manage and maintain the product

ENWW

Page 204
Image 204
HP CM2320 manual Clean the paper path from HP ToolboxFX, Clean the paper path from the product control panel