Administration and Utilities

Transactions recorded by the Auditor

Transaction

TRANS_MCU:REMOVE_DIRECTORY

TRANS_MCU:REMOVE_DIRECTORY_CONTENT

TRANS_MCU:RENAME

TRANS_MCU:RESET

TRANS_MCU:SET_PORT_CONFIGURATION

TRANS_MCU:SET_RESTORE_TYPE

TRANS_MCU:SET_TIME

TRANS_MCU:TURN_SSH

TRANS_MCU:UPDATE_KEY_CODE

TRANS_OPERATOR:CHANGE_PASSWORD

TRANS_OPERATOR:DELETE_OPERATOR

TRANS_OPERATOR:NEW_OPERATOR

TRANS_RTM_ISDN_SPAN:UPDATE_RTM_ISDN_SPAN

TRANS_SNMP:UPDATE

ActiveX Bypass

At sites that, for security reasons, do not permit Microsoft® ActiveX® to be installed, the MSI (Windows Installer File) utility can be used to install .NET Framework and .NET Security Settings components on workstations throughout the network.

All workstation that connect to Collaboration Server systems must have both.NET Framework and .NET Security Settings running locally. These components are used for communication with the Collaboration Server and can only be installed on workstations by users with administrator privileges.

The MSI utility requires the IP addresses of all the Collaboration Server systems (both control unit and Shelf Management IP addresses) that each workstation is to connect to.

If the IP address of the any of the target Collaboration Servers is changed, the ActiveX components must be reinstalled.

Installing ActiveX

To install ActiveX components on all workstations in the network:

1Download the MSI file EMA.ClassLoaderInstaller.msi from the Polycom Resource Center. The MSI file contains installation scripts for both .NET Framework and .NET Security Settings.

Polycom®, Inc.

759

Page 790
Image 790
Polycom 1500/1800/2000/4000 manual ActiveX Bypass, Installing ActiveX