Polycom 1500/1800/2000/4000 manual Viewing the Connections List, Using Notes

Users, Connections, and Notes

●If the above configuration are set off it will not be possible to add machine accounts.

●When setting the TLS mode off the system should check the existence of a machine account and block this operation until all machine accounts are removed.

Connections

The Collaboration Server enables you to list all connections that are currently logged into the MCU, e.g. users, servers or API users. The MCU issues an ID number for each login. The ID numbers are reset whenever the MCU is reset.

A maximum of 50 users can be concurrently logged in to the MCU.

Viewing the Connections List

To list the users who are currently connected to the MCU:

1In the Collaboration Server Management pane, click Connections (). A list of connected users is displayed in the Connections pane.

The information includes:

The user’s login name.

The user’s authorization level (Chairperson, Operator, Administrator or Auditor).

The time the user logged in.

The name/identification of the computer used for the user’s connection.

Notes

Notes are the electronic equivalent of paper sticky notes. You can use notes to write down questions, important phone numbers, names of contact persons, ideas, reminders, and anything you would write on note paper. Notes can be left open on the screen while you work.

Using Notes

Notes can be read by all system Users concurrently connected to the MCU. Notes that are added to the Notes list are updated on all workstations by closing and re-opening the Notes window. Notes can be written in any Unicode language.

Polycom®, Inc. 473