Polycom 1500/1800/2000/4000 manual Displays conference name and type of conference

Conference and Participant Monitoring

Conferences – Monitoring Information

FieldDescription

Display Name	Displays conference name and type of conference:
	•		– AVC Conference running in CP mode.
	•		– AVC Conference running in Video Switching mode.
	•		– The AVC conference has been secured using the *71 DTMF code. For details,
		see Secured Conference Monitoring (AVC CP Only).
	•			– AVC Operator Conference
	•			– Media Relay - SVC-based Conference.
	•			– Mixed CP and SVC Conference
Status	Displays the status of the ongoing conference.
	If there is no problem with the participant’s connection no indication is displayed.
	If one of the following statuses occur, the appropriate indication is displayed,
	proceeded by a warning icon ( ).
	• Audio – There is a problem with the participant’s audio.
	• Empty – No participants are connected.
	• Faulty Connection – Participants are connected, but the connection is problematic.
	• Not Full – Not all the defined participants are connected.
	• Partially Connected – The connection process is not yet complete; the video
		channel has not been connected.
	• Single Participant – Only one participant is connected.
	• Video – There is a problem with the participant’s video.
	• Content Resource Deficiency – Content will not be sent to legacy endpoints.
	• Awaiting Operator – A participant has requested operator assistance.
ID	The Conference ID assigned to the conference.
Start Time	Conference start time.
End Time	The time the conference is expected to end.
Dial in Number(1)	The Conference dial in number for ISDN/PSTN participants.
SIP Registration	The status of registration with the SIP server:
	• Not configured - Registration with the SIP Server was not enabled in the
		Conference Profile assigned to this conferencing Entity.

In Multiple Networks configuration, If one service is not configured while others are configured and registered, the status reflects the registration with the configured Network Services. The registration status with each SIP Server can be viewed in the Properties - Network Services dialog box of each conferencing entity.

• Failed - Registration with the SIP Server failed. This may be due to incorrect definition of the SIP server in the IP Network Service, or the SIP server may be down, or any other reason the affects the connection between the MCU or the SIP Server to the network.

• Registered - The conferencing entity is registered with the SIP Server.

• Partially Registered - This status is available only in Multiple Networks configuration, when the conferencing entity failed to register to all the required Network Services if more than one Network Service was selected.

Polycom®, Inc. 406