Polycom 1500/1800/2000/4000 manual Enabling AS-SIP Content

Ultra Secure Mode

●Once Content has been initiated by one of the endpoints, the Content channel will be opened to all endpoints and remain open even if the Content sharing endpoint stops sharing Content.

Enabling AS-SIP Content

AS-SIP Content is enabled in the New Profile / Profile Properties - Video Quality tab.

When the AS-SIP Content check box is selected the following are automatically enabled and cannot be disabled:

●Send Content to Legacy Endpoints

●Multiple Resolutions

System Flag

The time that the RMX waits for endpoints to respond to its SDP Re-invite is determined by a timer. The timer duration, in seconds, is controlled by the AS_SIP_CONTENT_TIMER System Flag. Its default value is 10 seconds. To modify the timer value, manually add this flag to system.cfg and modifying its value as required:

Range: 1 - 60 seconds. (Values outside this range are rejected and an error message is displayed.)

Polycom®, Inc. 870