Polycom 1500/1800/2000/4000 manual IP Network Service IP Parameters Field Description

Network Security

IP Network Service - IP Parameters

Field	Description
Network Service Name	Enter the IP Network Service name.
	Note: This field is displayed in all IP Signaling dialog boxes and can contain
	character sets that use Unicode encoding.
IP Network Type	Select the IP Network environment. You can select:
	• H.323 - For an H.323-only Network Service.
	• SIP - For a SIP-only Network Service.
	• H.323 & SIP - For an integrated IP Service. Both H.323 and SIP participants
	can connect to the Collaboration Server using this service.
	Note: This field is displayed in all Default IP Service tabs.
Signaling Host IP	Enter the address to be used by IP endpoints when dialing into the
Address	Collaboration Server using this Network Service.
	Dial out calls of participants to whom this network service will be assigned are
	initiated from this address.
	This address is used to register the Collaboration Server with a Gatekeeper or a
	SIP Proxy server residing on this network.
Media Card 1 Port 1 IP	If only one network is connected to this media card, it is enough to assign one
Address	media card to this Network Service. In such a case, enter one IP address for the
	media card according to the LAN Port used for the connection.
Media Card 1 Port 2 IP	If each of the LAN ports on one media card is used with two different networks,
Address 2	each port is assigned to its own Network Service. In such a case, enter the IP
	address of the port to be assigned to this Network Service.
	A LAN port that is already assigned to a different Network Service, displays the
	IP Address of the assigned port and it cannot be assigned to this Network
	Service (it is disabled).

Polycom®, Inc. 548