Polycom 1500/1800/2000/4000 manual Appendix C CDR Fields, Unformatted File

Appendix C - CDR Fields, Unformatted File

Event fields for Event 5 - ISDN/PSTN PARTICIPANT CONNECTED

FieldDescription

Secondary Cause Note: This field is only relevant to ISDN video participants and only if the Participant Status is Secondary.

The cause for the secondary connection (not being able to connect the video channels), as follows:

0 - Default

11 - The incoming video parameters are not compatible with the conference video parameters

12 - H.323 card failure

13 - The conference video settings are not compatible with the endpoint capabilities 14 - The new conference settings are not compatible with the endpoint capabilities

Secondary Cause (cont.)

15 - Video stream violation due to incompatible annexes or other discrepancy.

16 - Inadequate video resources

17 - When moved to a Transcoding or Video Switching conference, the participant’s video capabilities are not supported by the video cards

18 - Video connection could not be established

24 - The endpoint closed its video channels

25 - The participant video settings are not compatible with the conference protocol

26 - The endpoint could not re-open the video channel after the conference video mode was changed

27 - The gatekeeper approved a lower bandwidth than requested

28 - Video connection for the SIP participant is temporarily unavailable 29 - AVF problem. Insufficient bandwidth.

30 - H2.39 bandwidth mismatch

255 - Other

Event Fields for Event 7 - PARTICIPANT DISCONNECTED

Field	Description
Participant Name	The name of the participant.
Participant ID	The identification number assigned to the participant by the MCU.
Call Disconnection	The disconnection cause. For more information about possible values, see .
Cause
Q931 Disconnect	If the disconnection cause is “No Network Connection” or “Participant Hang Up”, then this
Cause	field indicates the Q931 disconnect cause.

Polycom®, Inc. 928