Polycom 1500/1800/2000/4000 manual Enablemsfec, Enablenovideoresource, Saudioonlymessage, Ntent

	System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
ENABLE_MS_FEC	Enables the Microsoft FEC (Forward Error Correction) support for RTV.
	Range: Auto/No
	Default: Auto
	When set to Auto, FEC support is enabled. FEC uses the DV00 option
	(DV=00 - one FEC per frame using XOR). When set to No, FEC support is
	disabled.
ENABLE_NO_VIDEO_RESOURCE	Enables playing a voice message that Informs the participant of the lack of
S_AUDIO_ONLY_MESSAGE	Video Resources in the RealPresence Collaboration Server and that he/she
	is being connected as Audio Only.
	Default: YES
ENABLE_RECORDING_	Allows recording control operations to be performed using either DTMF
OPERATION_VIA_SIPINFO	tones or a SIP INFO request.
	When set to NO: The Collaboration Server will send Recording Control
	Operation commands to the Capture Server using DTMF as in all previous
	version.
	When set to YES: The Collaboration Server will send Recording Control
	Operation commands to the Capture Server using a SIP INFO request.
	Default: NO
ENABLE_RTP_TRAFFIC_SHAPIN	Indicates whether traffic shaping, which is responsible for flattening packet
G	bursts within 100 msec time intervals, is enabled. When set to YES, traffic
	shaping is applied to all ports, resulting in some port capacity reduction in
	MCUs with MPMx/MPMRx cards (see Capacity Reduction During Traffic
	Shaping). When set to NO, traffic shaping is disabled.
	Range: YES, NO
	Default: NO
ENABLE_SELECTIVE_MIXING	Enables (default) or disables the Automatic muting of noisy AVC endpoints.
	For more details, see Automatic Muting of Noisy Endpoints.
	When set to YES, the automatic muting of noisy endpoints can be enabled
	or disabled at the conference level in the Conference Profile - Audio
	Settings dialog box.
	When set to NO, the automatic muting of noisy endpoints is disabled at the
	conference level and cannot be enabled in the Conference Profile - Audio
	Settings dialog box.
	Default: YES
	Note: MCU reset is not required when changing the flag value, though
	change will apply only for conferences created from that point onward.
ENABLE_SIP_PEOPLE_PLUS_CO	If security is of higher priority than SIP Content sharing, SIP
NTENT	People+Content can be disabled by setting this System Flag to NO. (The
	content management control (BFCP) utilizes an unsecured channel
	(60002/TCP) even when SIP TLS is enabled.)

Default: YES

Polycom®, Inc. 784