Polycom 1500/1800/2000/4000 manual New Participant Advanced Field Description

Address Book

4Usually, additional definitions are not required and you can use the system defaults for the remaining parameters. In such a case, click OK.

To modify the default settings for advanced parameters, click the Advanced tab.

5Define the following Advanced parameters:

New Participant - Advanced

Field	Description
Video Bit Rate / Auto	The Auto check box is automatically selected to use the Line Rate defined for
(IP Only)	the conference.
	Note: This check box cannot be cleared when defining a new participant during
	an ongoing conference.
	To specify the video rate for the endpoint, clear this check box, and then select
	the required video rate.
Video Protocol	Select the video compression standard that will be forced by the MCU on the
	endpoint when connecting to the conference: H.261, H.263, H.264 or RTV.
	Select Auto to let the MCU select the video protocol according to the endpoint’s
	capabilities.
Resolution	The Auto check box is automatically selected to use the Resolution defined for
	the conference.
	To specify the Resolution for the participant, select the required resolution from
	the drop-down menu.

Polycom®, Inc. 301