Polycom 1500/1800/2000/4000 Enabling and Configuring 802.1X Authentication, EAP-MD5, Eap-Tls

Ultra Secure Mode

Enabling and Configuring 802.1X Authentication

802.1X Authentication for each NIC is enabled or disabled in the Setup > Ethernet Settings dialog box. The following additional table columns are used to modify these parameters:

●802.1X Authentication

●User Name

●Password

Modify the Ethernet Settings table fields as set out below:

802.1X Authentication - Configuration

Field	Description
802.1x Authentication	For each NIC, click the arrow to open the drop-down menu and select (or
	disable) the 802.1X Authentication method:
	•	Off
	•	EAP-MD5
	•	EAP-TLS
	•	PEAPv0
	•	MSCHAPv2
User Name	Enter the User name that the RMX will use to register with the 802.1X
	Authentication Server. This must be the RMX’s DNS name and can be up to
	256 characters.
	Note: If the Domain Name (DC) field was completed in the Certificate Request,
	the User must be: <Common Name (DNS)>@<Domain Name (DC)> as set
	out in the Certificate Request.
Password	Enter the Password, that the RMX will use to register with the 802.1X
(EAP-MD5, PEAPv0 and	Authentication Server. Up to 256 Unicode characters can be used.
MSCHAPv2 only)	The Password is always displayed as four asterisks.

Polycom®, Inc. 863