Polycom 1500/1800/2000/4000 manual Authentication Password

Administration and Utilities

SNMPv3 - Traps

Field	Description	Version
User Name	Enter the name of the user who is to have access to the trap.	3
Engine ID	Enter an Engine ID to be used for the Trap.
	This field is enabled when the Enable Trap Inform check box is selected.
	If the Enable Trap Inform check box is cleared the Engine ID of the
	Agent is used. The Engine ID is comprised of up to 64 Hexadecimal
	characters.
	Default: Empty
Security Level	Select a Security Level from the drop-down menu.
	Range: No Auth, No Priv; Auth, No Priv; Auth, Priv
	Default: Auth, Priv

Authentication Protocol

Enter the authentication protocol: MD5 or SHA.

The availability of the MD5 Authentication Protocol as a selectable option is controlled by adding the SNMP_FIPS_MODE System Flag to system.cfg and setting its value. A value of YES means that MD5 will neither be displayed as selectable option nor supported.

Range: YES/NO.

Default: NO.

Authentication Password

Privacy Protocol	Enter the privacy protocol: DES or AES.
	The availability of the DES Privacy Protocol as a selectable option is
	controlled by adding the SNMP_FIPS_MODE System Flag to system.cfg
	and setting its value. A value of YES means that DES will neither be
	displayed as a selectable option nor supported.
	Range: YES/NO.
	Default: NO.
Privacy Password

13Type the IP Address and the Community name of the manager terminal used to monitor the MCU activity, and then click OK.

The Community name is a string of characters that will be added to the message that is sent to the external Manager terminals. This string is used to identify the message source by the external Manager terminal.

The new IP Address and Community name is added to the Trap Destinations box.

aTo delete the IP Address of a Manager terminal, select the address you wish to delete, and click Remove.

The IP address in the Trap Destinations box is removed.

Polycom®, Inc. 728