Polycom 1500/1800/2000/4000 manual Legacyepcontentdefaultlayout Flag, Csenableepc Flag, Example

System Configuration Flags

Example:

The following table illustrates the effect of modifying the PREDEFINED_AUTO_LAYOUT_5 flag in conferences with fewer or more participants than the number of windows selected in the default layout.

Example of Predefined Auto Layouts

Flag	Set to	Number of	Participant’s View
	Possible Value	Participants
		3	Voice activated switching displays the current
	CP_LAYOUT_1		speaker in the left window of the video layout and
	x2VER		only the two last speakers are displayed.
		7
PREDEFINED
_AUTO_LAYOUT_5
Default =	CP_LAYOUT_I	3
	P5
			Voice activated switching displays the current
			speaker in the large (top left) window of the video
			layout.
		7
			Voice activated switching displays the current
			speaker in the top left window of the video layout.

LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag

The following table lists the value for each video layout that can be defined for the

LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag. It allows the selection of video layout that will be displayed on the screen of the legacy endpoint when switching to Content mode.

For a list of available layouts see Available Layouts.

CS_ENABLE_EPC Flag

Endpoints that support People+Content may require a different signaling (for example, FX endpoints). For these endpoints, manually add the flag CS_ENABLE_EPC with the value YES (default value is NO) to the CS_MODULE_PARAMETERS tab.

Polycom®, Inc. 808