Polycom 1500/1800/2000/4000 manual Active Alarms Alarm Code Alarm Description

Appendix B - Active Alarms

Active Alarms

Alarm Code	Alarm Description
Hot backup: Network issue
Hot Backup: Paired MCU is
unreachable.
Initialization of ice stack failed
Insufficient resources	The number of resources in the license is higher than the actual system
	resources.
	Check the media cards or insert a media card.
Insufficient UDP Ports	When defining fixed port, the number of defined UDP ports is lower than
	the required ports.
	Configure additional ports.
Internal System configuration during	System configuration during startup.
startup	Wait until Collaboration Server startup is completed.
Invalid System Configuration
IP addresses of Signaling Host and	IP addresses of Signaling Host and Control Unit are identical.
Control Unit are the same	Assign different IP addresses to the Signaling Host and Control Unit.
IP Network Service added
IP Network Service configuration	IP Network Service was modified. Reset the MCU.
modified
IP Network Service deleted	IP Network Service was deleted. Reset the MCU.
IP Network Service not found	IP Service not found in the Network Services list.
	Configure the IP Network Service.
IPMC software upgrade in component
IPS 140 test result not received
ISDN/PSTN Network Services	New ISDN/PSTN configuration. Reset the MCU for the change to take
configuration changed	effect.
LDAP TLS: Failed to connect to OSCP
responder
Management Network not configured	Configure the Management Network.
Missing Central Signaling configuration	Configure the central signaling.
Missing Central Signaling IP
configuration
MPL startup failure. Authentication not	Authentication was not received from Switch. Check the switch card.
received.
MPL startup failure. Management	Management Network message was not received. Check the Switch
Network configuration not received.	card.

Polycom®, Inc. 907