Panasonic PT-D10000E, PT-DW10000E manual Appendix, Compatible RGB/YPBPR/DVI-D Signals

Appendix

Compatible RGB/YPBPR/DVI-D Signals

The following table specifies the types of RGB/ YPBPR/DVI-D signals compatible with the projector.

RGB signals can also be input within the range of fH=15 kHz–100 kHz, fV=24 Hz–120 Hz, dot clock=20 MHz–162 MHz.

Display mode	Number of		Scanning frequency		Dot clock	Format
	displayed dots		H (kHz)	V (kHz)	frequency (MHz)
NTSC/NTSC4.43/PAL-M/PAL60	720 × 480i		15.7	59.9		VIDEO/S-VIDEO
PAL/PAL-N/SECAM	720 × 576i		15.6	50.0		VIDEO/S-VIDEO
480i	720 × 480i		15.7	59.9	13.5	YPbPr/RGB
576i	720 × 576i		15.6	50.0	13.5	YPbPr/RGB
480p	720	× 483	31.5	59.9	27.0	YPbPr/RGB/DVI(EDID1)
576p	720	× 576	31.3	50.0	27.0	YPbPr/RGB/DVI(EDID1)
1080/60 i	1 920 × 1 080i		33.8	60.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/50 i	1 920 × 1 080i		28.1	50.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/24p	1 920	× 1 080	27.0	24.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/24sF	1 920 × 1 080i		27.0	24.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/25p	1 920	× 1 080	28.1	25.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/30p	1 920	× 1 080	33.8	30.0	74.3	YPbPr/RGB/DVI(EDID1)
1080/50p	1 920	× 1 080	56.3	50.0	148.5	YPbPr/RGB/DVI(EDID1)
1080/60p	1 920	× 1 080	67.5	60.0	148.5	YPbPr/RGB/DVI(EDID1)
720p/60p	1 280 × 720		45.0	60.0	74.3	YPbPr/RGB/DVI(EDID1)
720p/50p	1 280 × 720		37.5	50.0	74.3	YPbPr/RGB/DVI(EDID1)
VGA400	640	× 400	31.5	70.1	25.2	RGB/DVI(EDID2)
	640	× 400	37.9	85.1	31.5	RGB/DVI(EDID2)
	640	× 480	31.5	59.9	25.2	RGB/DVI(EDID1&EDID2)
	640	× 480	35.0	66.7	30.2	RGB/DVI(EDID2)
VGA480	640	× 480	37.9	72.8	31.5	RGB/DVI(EDID2)
	640	× 480	37.5	75.0	31.5	RGB/DVI(EDID2)
	640	× 480	43.3	85.0	36.0	RGB/DVI(EDID2)
	800	× 600	35.2	56.3	36.0	RGB/DVI(EDID2)
	800	× 600	37.9	60.3	40.0	RGB/DVI(EDID2)
SVGA	800	× 600	48.1	72.2	50.0	RGB/DVI(EDID2)
	800	× 600	46.9	75.0	49.5	RGB/DVI(EDID2)
	800	× 600	53.7	85.1	56.3	RGB/DVI(EDID2)
MAC16	832	× 624	49.7	74.6	57.3	RGB/DVI(EDID2)
	1 024 × 768		39.6	50.0	51.9	RGB/DVI(EDID2)
	1 024 × 768		48.4	60.0	65.0	RGB/DVI(EDID2)
	1 024 × 768		56.5	70.1	75.0	RGB/DVI(EDID2)
	1 024 × 768		60.0	75.0	78.8	RGB/DVI(EDID2)
XGA	1 024 × 768		65.5	81.6	86.0	RGB/DVI(EDID2)
	1 024 × 768		68.7	85.0	94.5	RGB/DVI(EDID2)
	1 024 × 768i		35.5	87.0	44.9	RGB
	1 024 × 768		80.0	100.0	105.0	RGB/DVI(EDID2)
	1 024 × 768		96.7	120.0	130.0	RGB/DVI(EDID2)
	1 152 × 864		64.0	71.2	94.2	RGB/DVI(EDID2)
MXGA	1 152 × 864		67.5	74.9	108.0	RGB/DVI(EDID2)
	1 152 × 864		76.7	85.0	121.5	RGB/DVI(EDID2)
	1 280 × 800		41.3	50.0	68.0	RGB/DVI(EDID2)
WXGA	1 280 × 800		49.7	59.8	83.5	RGB/DVI(EDID2)
	1 280 × 768		47.8	59.9	79.5	RGB/DVI(EDID2)
MAC21	1 152 × 870		68.7	75.1	100.0	RGB/DVI(EDID2)
MSXGA	1 280 × 960		60.0	60.0	108.0	RGB/DVI(EDID2)
	1 280	× 1 024	52.4	50.0	88.0	RGB/DVI(EDID2)
	1 280	× 1 024	64.0	60.0	108.0	RGB/DVI(EDID2)
SXGA	1 280	× 1 024	72.3	66.3	125.0	RGB/DVI(EDID2)
	1 280	× 1 024	78.2	72.0	135.1	RGB/DVI(EDID2)
	1 280	× 1 024	80.0	75.0	135.0	RGB/DVI(EDID2)
	1 280	× 1 024	91.1	85.0	157.5	RGB/DVI(EDID2)
	1 400	× 1 050	65.2	60.0	122.6	RGB/DVI(EDID2)
SXGA+	1 400	× 1 050	78.8	72.0	149.3	RGB/DVI(EDID2)
	1 400	× 1 050	82.2	75.0	155.9	RGB/DVI(EDID2)
UXGA	1 600	× 1 200	75.0	60.0	162.0	RGB/DVI(EDID2)

Note

•The number of display dots of the PT-D10000E is 1 400 × 1 050. If signals with a number of display dots differing from the data listed above are supplied, they will be converted into signals with 1 400 × 1 050 dots and displayed.

•The number of display dots of the PT-DW10000E is 1 920 × 1 080. If signals with a number of display dots differing from the data listed above are supplied, they will be converted into signals with 1 920 × 1 080 dots and displayed.

•Character “i” that follows the number of displayed dots stands for interlace signal.

•Flicker (line flicker) will be caused in images if interlace signals are connected.

118 – ENGLISH