Panasonic PT-D10000E, PT-DW10000E manual Press to select AUX DVI, Edid, Press to switch AUX DVI

Option1 settings (continued)

AUX DVI EDID (Only when the optional input module is installed)

Select the EDID mode setting that corresponds to the device to be connected.

1.Press ▲▼ to select “AUX DVI

EDID”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2. Press ◄► to switch “AUX DVI
EDID”.
• The setting will change as follows each time
	◄► is pressed.
		EDID1	EDID2 (PC)
•	EDID1 (Input signal formats supported) :
	480p, 576p, 720/60p, 720/59.94p, 720/50p,
	1	080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,
	1	080/23.98sF, 1 080/30p, 1 080/29.97p,
	1	080/25p, 1 080/24p, 1 080/23.98p, 1 080/50p,
	1	080/59.94p, 1 080/60p
•	EDID2 (Input signal formats supported) :
	Displayable resolution:
	VGA-UXGA (non-interlace)
	Dot clock frequency: 25 MHz - 162 MHz

Note

•Interlace signals are not supported even when the EDID2 (PC) mode is selected.

P IN P

This item is used to set the condition of the Picture-In- Picture.

1. Press ▲▼ to select “P IN P”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2.Press ◄► to switch “P IN P”.

•The setting will change as follows each time

◄► is pressed.

OFF	USER1
USER3	USER2

•OFF:

P IN P will not be set.

•USER1, USER2, USER3:

The input signals to be projected in the main window and sub-window can be set.

3.Press ENTER.

•The “P IN P:USER1”, “P IN P:USER2” or “P IN P:USER3” screen will be displayed.

P IN P:USER1

MAIN WINDOW	RGB1
SIZE
POSITION
SUB WINDOW:	VIDEO
SIZE
POSITION
FRAME LOCK	MAIN WINDOW
TYPE	MAIN WINDOW
MENU SELECT
CHANGE

72 – ENGLISH