Panasonic PT-DW10000E, PT-D10000E manual Adjust

4. Press ▲▼ to specify the area to be adjusted.

• To joint the top: set “UPPER” to “ON”.

• To joint the bottom: set “LOWER” to “ON”.

• To joint the left: set “LEFT” to “ON”.

• To joint the right: set “RIGHT” to “ON”.

5. Press ENTER to toggle “ON” and “OFF”.

6. Press ◄► to adjust the compensation width and start position.

■ To display the adjustment marker

7. Press ▲▼ to select “MARKER”.

EDGE BLENDING

UPPER	START	0
OFF	WIDTH	128
LOWER	START	0
OFF	WIDTH	128
LEFT	START	0
OFF	WIDTH	128
RIGHT	START	0
OFF	WIDTH	128
MARKER		OFF

BRIGHT ADJUST

MENU SELECT

ENTER CHANGE

8.Press ENTER to select “ON”.

•A marker for adjusting the picture position appears. The optimal point is the position where the red line of one frame overlaps the green line of the other frame.

The correction widths of the jointed frames must be the same value all the time. The optimal joint cannot be achieved if the jointed frames have different correction widths.

The optimal point is where

these lines overlap.

Green line

Red line

9.Press ▲▼ to select “BRIGHT

ADJUST”.

EDGE BLENDING

UPPER	START	0
OFF	WIDTH	128
LOWER	START	0
OFF	WIDTH	128
LEFT	START	0
OFF	WIDTH	128
RIGHT	START	0
OFF	WIDTH	128
MARKER		OFF

BRIGHT ADJUST

MENU SELECT

ENTER SUB MENU

10.Press ENTER.

•The “BRIGHT ADJUST” screen will be displayed.

BRIGHT ADJUST

BRIGHT INSIDE

BRIGHT OUTSIDE

UPPER0

LOWER0

LEFT0

RIGHT0

MENU SELECT

ADJUST

11. Press ▲▼ to select “BRIGHT INSIDE”.

12.Press ENTER.

•The “BRIGHT INSIDE” adjustment screen will be displayed.

BRIGHT INSIDE

INTERLOCKEDON

Wh0

R0

G0

B0

MENU SELECT

CHANGE

•When “INTERLOCKED” is set to “OFF”, individual adjustment of “R”, “G” and “B” will be possible.

13. Press ▲▼ to select an item, and press ◄► to adjust the setting.

•Once adjustment is complete, press MENU to return to “BRIGHT ADJUST”.

14. Press ▲▼ to select the part of “UPPER”, “LOWER”, “RIGHT”, “LEFT”.

Basic Operation

ENGLISH – 63