Panasonic PT-DW10000E Option1 settings, Adjusting colour matching, Press to select Color Matching

Option1 settings

MENU

▲▼◄►

ENTER

DEFAULT

This menu can be used to make a variety of picture and projector settings.

MENU	Press to display the
	MAIN MENU screen.

Press to select “OPTION1”.

Press to display the “OPTION1” menu.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

OPTION1

OPTION2

TEST PATTERN

SIGNAL LIST

NETWORK

SECURITY

MENU SELECT

ENTER SUB MENU

Adjusting colour matching

When multiple sets are used simultaneously, this projector allows the user to correct the difference of colours among the sets.

1.Press ▲▼ to select “COLOR MATCHING”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2.Press ◄► to switch “COLOR MATCHING”.

•The setting will change as follows each time

◄► is pressed.

OFF 3COLORS

MEASURE 7COLORS

•OFF:

Colour matching adjustment is not carried out.

•3COLORS:

It is possible to adjust the 3colours of “R (Red)”, “G (Green)” and “B (Blue)”.

•7COLORS:

It is possible to adjust the 7colours of “R (Red)”, “G (Green)”, “B (Blue)”, “Cy (Cyan)”, “Mg (Magenta)”, “Ye (Yellow)” and “Wh (White)”.

•MEASURE:

Refer to “Adjusting the colour matching using a colorimeter” on the next page for details on these modes.

Basic Operation

Special Features

ENGLISH – 67